Produced at the Avald plant according to GOST 4028-63 with a flat or conical head made of metal thermally untreated wire on cold landing machines using preservative oils, to prevent corrosion. Nails are used in the construction of houses, baths, arbors and other wooden structures, for the manufacture of wooden packaging, as well as for mounting sheet metal with a thickness of up to 1 mm.

Nails are fusing in cardboard boxes of 25 kg. At the request of the customer, there is a weight of 100, 500, 1000, 5000 grams. Constant availability low prices from the manufacturer. Inspection is carried out without the use of magnifying devices. The dimensions and location of the surfaces of the construction nails are checked by a universal measuring instrument or caliber. The height of the head, the radius under the head and the angle of the pureness of the nails are not checked and must be provided by the technological instrument. Under the Hat of the construction nail GOST 4028-63 there is a corrugated surface, for a reliable connection.

Construction nails are one of the simplest fasteners that can be bought, but they still come in a huge variety of forms and sizes.Each type has its own pros and cons, and many of them are designed for very specific nations.In order to get the best results from your construction project, you must be careful to choose the right nail type.

Construction nails with flat head - drawing

Construction head nails - drawing

Mass of building nails

Buy construction nails At a wholesale price at the Avald Metallurgical Plant by phone or order via email, Online is an order. Delivery to the object. Loading in the container.

Construction nails.

Design and size

(With amendments No. 1, 2, 3)

GOST 4028-63

Group B78.

Interstate standard

Construction nails

Design and size

BUILDING NAILS. Construction and dimensions

ISS 77.140.65

Date of introduction 1964-08-01

Information details

1. Designed and introduced by the Ministry of Black Metallurgy of the USSR

2. Approved and enforced by the State Committee of Standards, Measures and Measuring Devices of the USSR from 06.08.63 N 567

3. Instead of GOST 3886-47, GOST 3887-47, GOST 4028-48, GOST 4031-48

4. Reference regulatory and technical documents

5. Restriction of the validity of the Discontinued Protocol No. 5-94 of the Interstate Council on Standardization, Metrology and Certification (IUS 11-12-94)

6. Edition (February 2009) with changes in N 1, 2, 3, approved in October 1965, November 1980, December 1987 (IUS 11-65, 2-81, 4-88)

1. Design and sizes construction nails from flat head Must comply with the specified ones 1 and in Table 1.

Chert.1. Construction and sizes of construction nails with flat head

h min = 0,6d.; D min = 2d.

Table 1

Conditional designation of construction nails with a flat head, a rod diameter of 1.2 mm and a length of 25 mm:

Nails n 1,2х25 GOST 4028-63

(Modified edition, meas. N 2).

2. The design and dimensions of the nails with the conical head must correspond to the specified ones.2-4 and in Table 2.

Damn. Roubli nails

h min = 0,6d.

Damn.3. Trephic nails

h min = 0,6d.

Chert.4. Trephic nails with jumpers

h min = 0,6d.; c. = 0,3d.; T. ≈ (1,25 − 1,5)d.

table 2

Note. At the request of the consumer, the nails round the size of 1.8x32 are made with a flat head. Cute designation of construction nails with a conical head, round, with a diameter of 2.5 mm and a length of 60 mm:

Nails to 2.5x60 GOST 4028-63

The same, trephing:

Nails t 2,5х60 GOST 4028-63

The same, trephy with jumpers:

TP 2,5х60 GOST 4028-63

3. Technical requirements for nails - by.

Note. The unilateral uniform deflection of the rod in the middle part of the nail size (1.8x60) mm should not exceed 0.7 mm.

(Modified edition, change. N 1, 2).

4. The theoretical mass of nails is indicated in the application.

(Introduced additionally, meas. N 2).

Appendix (Reference).

Theoretical mass of nails

Note. The mass of 1000 trephing nails by 15%, and the trophic with jumpers by 12% less than the mass of 1000 round nails of the same size.

ATTACHMENT. (Modified edition, meas. N 1-3).

A shape of a rod with a pointed end and head in the form of a hat. These hardware are used in construction industry In order to fasten all sorts of materials.

Standards of building nails

Form, dimensions and material of nails are regulated by Gosstandart 4028-63. According to this document, nails are released with a circular cross section. The head has a conical or flat shape. The end of the nail flat head is smooth, conical - corrugated.

The face of the angle of acuction in the nails of construction GOST 4028 63 is no more than 40 degrees. The material of the manufacture serves steel grade 1-3 KP / PS. Often there is no special coating. But on sale and nails GOST 4028 63 with a galvanized surface.

Construction nails are used to fasten each other (most often wood). When clogging a nail with a hammer, the body of the methization is introduced into the parts connected and is held there due to the force of friction.

Distinctive characteristics of nails GOST 4028 63

A distinctive feature of construction nails is their exceptional reliability in operation, simplicity in terms of installation, an affordable low price and an abundance of diverse sizes. The diameter of the nails of the GOST 4028 63 can be 0.8-1.8 cm.

Conditional designation in the nail with a flat head - "P". Accordingly, the analogues with the conical head are marked with the letter "K". Then in the designation indicates the diameter of the rod and its length.

Construction and repair require reliable materials. Predated for these purposes served nails. The simplicity of their design, the available cost, a large selection of length and thickness, insignificant weight and resistance to physical impacts have always attracted builders to them and just home masters. Surely, every person at least once in his life scored a carnation in the wall!

Progress B. building technologies Brought many new hardware. Some of them differ in high strength, others promise extraordinary resistance to extreme conditions. But the good old friend is a simple nail - always remains the most sought-after fastener. With it, you can easily and easily create a strong reliable connection of building structures.

We invite you to purchase nails building GOST 4028 63 In our online store building materials. Connected by hardware, your designs will gain reliability and durability!

State Standard of the Union of SSR

Construction nails

Construction dimensions

GOST4028-63

State Committee of the USSR for Quality Management and Standards

Moscow

State Standard SSR

Datavidation 01.08.64

Non-compliance with the standard prosecutor's law

1. The design and sizes of construction nails with a flat headhell \u200b\u200bmust match the specified on and in.

Table 1

Where all sections News Gosty departmental production rates of consumption of materials on assembly and special construction works Office guidance document Geodesic, cartographic instructions, norms and rules of government elemental estimated standards for construction work. State elemental estimated norms on the installation of equipment Territorial unit rates, estimated norms and prices for construction and special construction work. Public element estimates for repair and construction works Standard ISO Labor process Map Moscow City building standards Methodical recommendations Methods for controlling the norm and rule rules technological design All-Russian Classifier Technological Regulations Rules and Normal Normal Energy Interactive Rules for Labor Protection Rules for Metrology Recommendations for Nuclear Industry Recommendations Internal Standardization Recommendations Guidelines technical material Sanitary standards Standard of the Council of Economic Mutual Assistance Standard Organization Standard Enterprise Typical Norms and Rates Territorial Construction Conductors Territorial Collection of Estimated Norms and Rates FEDERAL Single Rates for Construction Works FEDERAL SECURITY RESULTS INSTALLATION OF EQUIPMENT FEDERAL SUBJECT RESULTS FEDERAL WORKS OF FEDERAL SINGLE RESULTS FOR REPAIR-CONSTRUCTION ORDERS Estimated standards Construction standards and rules Sanitary-epidemiological rules and regulations Guidelines hygienic standards Methodical documents in housing and communal services Methodical documents in the construction of measurement methods Methodical instructions Norms anti fire safety Technological design standards Sectoral road rules Sectoral standards Safety rules Rules for labor protection Rules Fire safety rules Guideling documents Guidelines Guidelines Code of Rules Typical instructions Technical recommendations Departmental standards of technological design Executive construction standards Market

In the search results, show 10 20 50 100 links on the page

GOST 4028-63

Construction nails

Design and size

GOST 4028-63

State Committee of the USSR on product quality management and standards

Moscow

State Standard of the SSR Union

Date of administration 01.08.64

Failure to comply with the standard is prosecuted by law.

1. The design and sizes of the construction nails with a flat head must match the specified on.

Table 1

Conditional designation of flat head nails with a rod diameter of 1.2 mm and a length of 25 mm:

Nails n 1,225 GOST 4028-63

(Modified edition, change No. 2).

2. The design and sizes of construction nails with a conical head must correspond to the specified on, 4 and in .

Roubli nails

Trephic nails

Trephic nails with jumpers

Table 2

Note . At the request of the consumer, the nails round sized 1.832 are made with a flat head.

Symbol nails with a conical head of a circular diameter of 2.5 mm, a length of 60 mm:

Nails to 2,560 GOST 4028-63

The same, trephing:

Nails t 2,560 GOST 4028-63

The same, trephy with jumpers:

TP 2,560 GOST 4028-63

3. Technical requirements for nails - according to GOST 283-75.

Note . One-sided uniform deflection of the rod in the middle part of the nail size of 1.860 should not exceed 0.7 mm.

(Modified edition, change No. 1, 2).

4. The theoretical mass of nails is indicated in the reference application.

(Introduced additionally. Code No. 2).

ATTACHMENT

Reference

Theoretical mass of nails

Note . The mass of 1000 trophic nails by 15%, and the trophic with jumpers by 12% less than the mass of 1000 nails of the round of the same size.

(Modified edition, change. No. 1, 2, 3).

Information details

1. Designed and introduced by the Ministry of Black Metallurgy of the USSR

Performers

K. G. Zalyalutdinov; B. M. Rigmanuty; V. G. Wilde; R. V. Zhirov

2. Approved and implemented by the State Committee of Standards, Measures and Measuring Devices of the USSR from 06.08.63 No. 567.

3. Instead of GOST 3886-47, GOST 3887-47, GOST 4028-48, GOST 4031-48.

4. Reference regulatory documents.

5. The validity period has been extended to 01.01.96 by the State Standard Decree of 15.05.85 No. 1353.

6. Reprint (May 1990) with amendments No. 1, 2, 3, approved in October 1965, November 1980, December 1987 (IUS 11-65, 2-81, 4-88).