What to glue the acrylic screen from the bathroom. What can be glued on the glue on an acrylic basis

Adhesive based on acrylic polymers is characterized by high adhesion, therefore refers to the discharge of universal. There are various modifications acrylic gluewhich are suitable for gluing the most different materials: fabrics, paper, metal, wood, glass, gypsum, plastic, leather, ceramics, etc.

This non-toxic glue provides high compound strength. It does not have harmful solvents, so it is widely used for decoupage and other types of creativity.

What to buy - Acrylic Glue Review

Acrylic glue is produced in various forms. It may be single or two-component, liquid or thick, colorless or color. There are modified polyacrylate-based adhesives, which are frozen under the action of UV light.

Each glue brand is designed to perform a specific set of tasks. In terms of price-quality ratio, the following types have proven itself. acrylic-based glue.

Contact glue VGT. Acrylic stickiness on the basis of an aqueous dispersion of an acrylic copolymer. Designed to glue all smooth non-absorbing surfaces (polyethylene, polypropylene, etc.).

It does not have an unpleasant smell, after drying, the contact glue becomes transparent, but retains stickiness. Produced in plastic buckets, packing options: 0.9, 10, 25 kg. Packaging 0.9 kg costs about 500 rubles.

Acrylic Adhesive Decart Based on a high-quality acrylic dispersion - an improved PVA analogue. It has increased strength and water resistance. Universal, suitable for working with many materials (except polyethylene and soft plastics).

In a liquid state, glue has white, when drying becomes transparent. Produced in plastic bottles of 65 and 260 grams. Big packaging costs about 200 rubles.

Repair and installation glue Titan Wild Acrylic Based on styrene acrylic dispersion. Designed for quick and reliable gluing various building materials: Metal, glass, wood, plastic, plaster, polystyrene foam, ceramics, etc.

In a liquid state, glue has a milky white color, when drying it becomes transparent. The drying time of glue at room temperature is one day. Tube glue with a volume of 250 ml costs about 150 rubles.

Litokol - ready-to-use single-component composition with good elasticity and high adhesion. It can be used at temperatures from -30 to +90 degrees.

It is used for different finishing works, for example, for facing the tiles of walls and floor in rooms with high humidity, gluing glass gambles and polyurethane foam panels.

DALI - Universal glue on an acrylic basis. Gives a durable, elastic and waterproof seam. It does not crack, fills defects and irregularities.

Krass - another indispensable composition for laying outdoor coatings. Its properties allow you to reliably fix linoleum, carpets, PVC, wood, fiberboard and chipboard. Is different high power Initial setting and excellent adhesion. Does not give a shrinkage. Can be used in working with "warm" floors.

MasterTex Pro Superfix "Liquid Nails" - Modern mounting glue based on modified acrylic copolymers. Designed for reliable fixation of widespread construction and finishing materials - wood, glass, GVL, GKL, ceramics, natural and artificial stone, MDF, polystyrene, plastic, etc.

Modified polymers provide high adhesion, ensure gluing strength. Suitable for internal and outdoor work, it allows you to glue even loosely adjacent surfaces. Environmentally safe. When drying, a high-strength elastic seam forms. The cartridge under the gun 280 ml is worth about 200 rubles.

How to glue by mounting glue on an acrylic basis - instruction

To work with the installation glue "Liquid nails" on an acrylic basis, the following inventory will be needed:

• pistol for sealants;
• acrylic primer;
• toothed spatula;
• sponge and tank with warm water To quickly remove glue inches.

Instructions for cladding walls with MDF panels using an acrylic-based mounting glue:

1. Preparation of the foundation. The wall surface should be smooth, strong, clean and dry. For better adhesion, it is recommended to pre-impregnate the base of concentrated acrylic primer. This event Allows you to reduce glue consumption.

1. Applying glue. Tuba with glue is installed in a gun. Pressing the adhesive with a continuous wavy line is applied to the surface and smoothes with a metal gear spatula. The thinner of the layer of "liquid nails", the faster the seting occurs, and the panel is less sliding along the wall. The ideal temperature for working with glue on an acrylic basis is 18-24 degrees.

1. Gluing. The panel is tightly pressed against the wall, adjust its location and hold for 2-3 minutes. Complete drying of the adhesive occurs in a day, only after that a mechanical effect on the lined surface is allowed.

VIDEO INSTRUCTION

Hello, friends! This entry I will start a cycle of articles about earnings not only on the Internet, but also, as they say, in real or offline. Everyone knows that it is much easier to earn here that most is doing. But the results improve with the use of the Internet, without which no business is now. We will combine.

As I worked a lot with the plexiglass, then about offline and start with him. How to apply it and where to take for special cases I will write later, and now we will analyze a very popular question than glue plexiglas.

Adhesives for plexiglas

1. Professional glue for extrusion acrylic (it is plexiglass, plexiglass) "ACRIFIX 117", "Acrifix 116"
2. Dichloroethan
3. Acetic Essence
4. Glue "Cosmofen"different manufacturing options.
5. Glue "Colakril-20"and "Colakril-30"
6. Second Adhesive "Moment"

Choose in the tablehouse what you have and immediately see, so as not to read too much.

Just necessarily (!) Look. They are and very helpful to know them. Otherwise, you still know them, but late.

Glue "Acrifix 117"

Very good glue. I would say the best, of what I used. Acrifix 117.use well with mass production.

His features:

• high strength of adhesive seam
• transparency seam
• durability
• quickness setting

In addition, he has a number of advantages. It has smaller toxicity, compared with the most affordable dichloroethane. High capillary properties - it easily penetrates deep into the narrow slots and cracks in the plexiglass. Self, without pressure.

But glue Acrifix 117.there is one major drawback for home gluing products: it is expensive, packed in large banks 1 liter and rarely selling. The price for January 2015 reached 6000 rubles. per liter. And now I do not know.

In Acrichix 117 it is useful to add some acryptions 116, approximately 1:10. Then the mixture fills the smallest irregularities of the surface of the surfaces glued.

Glue "Acrifix 116"

It is also intended for gluing plexiglas, but it is sold in tubes of 100 grams, because It is more thick (in thickness it looks like fresh honey, but only transparent color). It is more convenient for them to glue the perfectly smooth surfaces, rough, with jar. In this case, it fills the irregularities of the material better.

Dichloroethan

Good replacement expensive adhesives dichloroethan. It can be purchased, for example, in the store selling radio components, very cheap. When gluing perfectly smooth surfaces, pressed to each other do not need any additives to dichloroethane. You can use a syringe when gluing. Just dial it in the syringe and run into the joint between the glued surfaces. He perfectly glues the details. The joke will be perfectly transparent, you can achieve, so that without bubbles.

And you can breed in it chips or plexiglass sawders and then it will become more dense. You can no longer only pour it, but also to smear on the surfaces glued.

Dichloroethane is very poisonous!Bear from children! Bonding to spend in a well-ventilated room, away from sources of fire. Store at room temperature.

I do not even advise to pour a bubble with this liquid in the room!

Acetic Essence

Surprised, but the first experiments showed excellent results. For some properties, this "glue" exceeds industrial Acrifix. Earlier, I wrote:

But still need to check it on the durability of the adhesive seam and other parameters. Therefore, the results will be later.

Now I can say that they can be glued, but carefully. Glue acetic acid can. There are many nuances in the results of gluing. The main problems are on the bends of parts, where the strong internal voltage in the glass after drying is the cracks.

Today I post a video about the first results of checking the strength of gluing plexiglass acetic essence.

Sample for gluing 3 millimeter plexiglas:

Video gluing acetic essence 3 mm plate and 6 mm plexiglass strips:

Clay "Colacril-20" and "Colacril-30"

They came to replace Acrifix 116 and Acrifix 117,as they became too expensive, with a rise in currency rate in 2015. For gluing them it is better to breed with each other. Because

• Colacril-20 liquid
• Colacril-30 thick

At the same time, good gluing and transparent seam is achieved. Transparent, like glass and without bubbles!

In contrast to acriphes, they have a feature - when glue hitting the tension of the plexiglass (and it appears even at 15-20 mm from the seat of the plexiglass fold) - small cracks appear in the bend place. The strength and trademark of the product is lost.

Second Adhesive "Moment" and Cosmofen

These adhesives are available in a variety of packages, from tubes to plastic bottles with a spout. It is difficult to say what is better. They are very similar in their properties, because Their composition includes cyanacrylate.

Their feature is do not dissolve plexiglas And so I do not recommend them to use where high strength is needed. But they can "grab" small bonded products. For example, if a small element has fallen off at a decorative toy. Not carrying a load.

In addition, often the place of gluing whites, becomes opaque.

But they are very well glued to the skin, especially on the fingers! Therefore, twist the tubes after use through a polyethylene film, and at least one droplet will definitely fall into the hands.

Attention! Using one year different adhesives Our production returned to acreixes. They are the best Adhesives for plexiglas, but also the most expensive.

How to glue plexiglas

When the plexiglass gluing uses a medical syringe with a needle. Fill with glue syringe. The tip is sharpening at 90 degrees, bars or diamond nadfyl. Otherwise, the glue will splash towards the needle's bevel. So you can glue plexiglas at home and in production, I will not talk about industrial scales :).

Glue very neatly poured into the joint between slightly pressed stationary Details.

Details are fixed until glue setting. It can be from 2 to 30 minutes. Depending on how much glue you poured. The main thing is that the glue is dry and not spread over the surface of the product after the coup.

After that, you can turn the part and glue other parts if it is a box, for example.

- (opens in a new tab)

Did you like the information? Share with friends, write reviews about your results.

Products from plexiglas are found literally at every step. They are made by mechanical processing, molding, stamping. Products consisting of several parts are rarely performed by the method of detachable connections. Bonding is the most common method of assembling parts.

The main reason for such popularity was the high indicators of the strength and quality of the seam, almost imperceptible visually. But all these advantages are directly dependent on the experience of the Master and the materials used - adhesives. So, what to glue plexiglas?

Classification of adhesives for acrylic

Adhesives designed to glue the plexiglas, is divided into two groups:

1. Classifying chemical types (curing two-component adhesives for plexiglass). The hardening of the components of adhesives of this group occurs as a result of a chemical reaction between them. The reaction itself can be activated under the influence of one of the conditions:

• mixing the components of glue;
• introduction to a mixture of additional activators or hardeners;
• heated;
• by blowing moisturized air.

2. Mixing on physical type (Lucky adhesive, ribbons with an adhesive layer, adhesive compositions in the form of a solution). They contain solvents, as they evaporate which the adhesive mass is rejected.

Features of gluing block and extrusion plexiglass

The extrusion and block plexiglass when gluing behave differently:

• blocking organic glass refers to high molecular compounds, so it is weakly affected by pure solvents. To glue the plexigla of this type, it is advisable to use polymerizable adhesives: the strength of the seam reaches in this case 75% of the strength of the base material. The optical characteristics of the seam of the seam are such that the product can be operated outdoors without prejudice to it. appearance. Adhesive lacquers behave well: in the process of drying, the solvent from their composition evaporates slowly, giving enough time to swell the polymer in the adhesive seam. Thus, the parts from organic glass are almost completely deprived of internal stresses, and, consequently, the tendency to cracking. When gluing the block plexiglass, the pre-annealing lacquers are not required (except for cases of pipe connections);
• extrusion (low molecular weight) plexiglass is glued either by the same polymerizable glue or adhesives in the form of solutions. But this type of material requires pre-anneal at a temperature of 60-80 degrees Celsius.

Plexiglass gluing technology depending on the types of glue

The process of gluing plexiglass with different adhesive materials has a number of common operations.

1. Preparation of the surface:

• bonding places should have a certain roughness, so the first thing they are treated with grinding paper with grain 320-400;
• the places treated on the first operation are degreased in accordance with the indications of the glue manufacturer;
• if necessary, details intended for gluing are exposed to annealing;
• to protect the surface of parts from the effects of solvents, they are placed by a protective film.

2. Preparation of glue (when using multicomponent adhesive compositions)

3. Application of glue to the surface

When performing this operation, a general requirement is controlled by uniform wetting of the connected surfaces and the same thickness of the adhesive layer on the entire length of the connecting seam. The method of applying glue depends on its viscosity.

• exposure, during which glue acquires adhesive ability (the time of this operation depends on the type of glue and is indicated by the manufacturer);
• pitch and fixation of the parts connected.

When performing this operation, it is necessary to exclude possible air bubbles in the seam. No lining of parts with skews is not allowed. Applying parts to each other should be carefully, not allowing the lubrication of the adhesive layer. Docked parts should be securely fixed with each other through special devices, which in addition to fixing provide the necessary compression force. Glue solutions require greater pressure than multicomponent due to their significant shrinkage during adhesion.

• exposure to a complete curing of glue (in accordance with the relevant manufacturer's instruction);
• removing fixing devices.

4. Final product processing

This operation consists in performing the final annealing to increase the strength characteristics of the connecting seam. This operation is excluded in the case of using polypened glue.

Such is the general technological route of organic glass gluing. But depending on the adhesive systems used, the components of the parts have some differences.

Glues in the form of a solution

This type of adhesives is used to glue narrow, short and flat parts. On the preparatory Stage The edges are trimmed or milling. Surfaces are often subjected to additional processing by thin grinding by cycling or by repeated glue application. These techniques will reduce the formation of air bubbles.

Methods for applying glue:

• the submersible method is the most common. During the operation in the glue solution, one of the parts to be connected is immersed. Dive time - before the softening of the surface of the plexiglass;
• the capillary method differs from the previous one in that first the parts are docked, and then glue glued to the edges of the glued surfaces. Due to the capillary effect, glue mass is automatically absorbed into the connecting seam. For guaranteed penetration adhesive solution In the seam you can use the spacer wire with a diameter of 0.3 mm.

Polymerizable and polypriced adhesives

In contrast to glue-solutions, polymerizable and polypened adhesives are applied to the surface in such a way that the mass thickening is obtained over the connecting seam. This is necessary due to the high degree of glue shrinkage during the rejection process. Adhesive Zazo r In this case, it is selected in the range of 0.2 - 0.5 mm. Fixed parts connected:

• when gluing the jack - on a flat plate;
• when connected at an angle - with the help of special devices;
• when gluing over the entire surface area - with the use of spacer blocks or wire;
• when gluing parts having hollow spaces - various locations are allowed.

A separate requirement when using polypened adhesives: due to the absence of solvents in their composition, the glued surfaces are cleaned with special care.

Adhesive lacquers and adhesive tapes

The adhesive lacquer can be applied using a tube, cannula, a syringe or immersion method. The exception is the capillary method - it does not use it with varnishes. The amount of glue applied on the surface should provide its small excess protruding on both sides of the connecting seam.

Adhesive tape is economically beneficial when acrylic gluing. The operation in this case is performed quickly, the main thing is that the surface is well cleaned, degreased and sucked. This material is desirable to apply on closed areas of the product (or poorly visible).

Safety Safety with glue

The adhesives and their components (in particular, solvents) refer to hazardous substances that can lead both to the loss of health and the emergence of the fire (sometimes explosion).

Basic rules for handling adhesives

• exclude presence in the workplace (or in the place of storage of adhesives) of open fire sources or electric heaters with a spiral;
• do not eat and do not smoke in workplaces;
• work in clean, well-ventilated rooms in which there are no drafts;
• above the floor level to establish the means of aspiration (pairs of solvent heavier air);
• while working with adhesives to use personal protective equipment (respirators, gloves, protective glasses).

Organic glass is an amazing material that allows you to implement the most bold designer fantasies. But they ultimately find themselves in the hands of the artist, the quality and strength of the product depends on the skill of which.

On the acrylic bath, the side rests poorly, 2 years ago, the builders were glued with a plastic side, triangular approximately 2 cm of the sides, now he fell off and revealed a pretty darkened seam at the junction of the bath and tile. Seam approximately 1cm. Tell me, please, how best to do? Remove seams, and what to close, what is guaranteed to glue the side to an acrylic bath and what better to buy a side? Builders argued that nothing on acrylic does not hold, but I have doubts

Experts answered the question

Best answer

8 replies

1.All that it was old to remove.
2. Degrease. Without fanaticism!!!
3. Crop the corner in size. All sides. If it looks bad in the corner - to line with a grinder or a knife. There are regular corners and ending cabs, but they do not like them.
4. Glit to silicone. Better on white. Lubricate silion need both ribs corner. If it is a regular tide for the bath, then there is a small backbone, in this gap, too, you need to crawl silicone, otherwise it will swell from hot water. Silicone is better to use water-soluble, it is more convenient to work with it. For example, silicone at the moment. That is, it glued and the wet sponge of the surplus erased.
It should turn out something like this.

Useful answer? Yes 2 / Not

bought recently acrylic sealant. I have not yet used, but something tells me that it will be more preferable than silicone, when installing any side of an acrylic bath.

I agree with Vladimir completely! It is possible even easier: corners with a sticky layer are sold, roughly speaking as a scotch 3D, removed the protective film from the sticky layer and glued! Any sealants are darker over time (

Useful answer? Well no

We had a problem with a pallet in the shower cabin, the type of acrylic type, between the wall and the pallet, at first Silicone was made on the installation, later the water began to leak, it turned out that Silicone was lagging behind acrylic. They glued the corner with a sticky layer, the joy will not long, then the corner on Silicone, lags behind again. Later found and the internet information that is better to use the silicone or sealant for the aquariums, we tried, we helped us!

Useful answer? Well no

And now I discard everything from acrylic baths and pallets, I got my information on their use. A significant problem has revealed - acrylic baths and pallets under the load "go", compress and disperse, because of this, any sealant behind the acrylic lags behind the acrylic, there were two severe cases of flooding lower neighbors with subsequent repair. The cast iron does not "go", and there is no such problem with him. Therefore, it is better to replace acrylic on cast iron.

Useful answer? Yes 3 / Not 1

I fully support Yuri Radyostev! His bath with hydromass, purchased 12 years ago for 180t, ready to throw out from the balcony, I hate! I dream about a cast-iron bath. Such tips are good gave, as well as to glue the corner, only Yuri wrote that these baths when filling the water "go" !!! Because of this, corners are dug. The corner needs to be glued only in the filled bath and wait a few days until complete drying, only then pull the water. There were still articles that the acrylic itself needed to fasten a special degree to the wall, which would stand on dead and not walked. My bath creates and sighs not only when the water is typing, but also when I descend. In general, "walks and walks"! Corner has long been dugged, Silicone also moved away from the wall. I do not recommend anyone acrylic, and even more. Diseaseners are already refused. In most of the very expensive repairs exhibited in the professional selection, there is cast iron.

Useful answer? Yes 2 / Not

about acrylic baths. The fact that they have to go to someone - this is only a matter of incorrect selection and improper installation. And nothing else. Briefly explain. There is an acrylic bath for 10 thousand, eats for 20, and there is for 50. Conditional prices, the order is important here. So, the cheapest acrylic baths have a thickness of the walls of 4-6 mm. The fool is clear that such a bath under load will walk with a walker as a plastic bucket. There are baths with a thicker layer of walls and with a double bottom. Some baths have a thickness of the bottom to 5 cm, the screws are perfectly twisted in it. Moreover, a lot depends on the frame. There are on sale baths in general without frames, there are on liquid frames, where some studs with nuts on the ends are on the legs. Very often, complete to such baths are some plastic corners, which should be attached to the wall and thus reduce geomeryal deformation.

In general, briefly. Cheap and well does not happen. Now there are many very good acrylic baths on the market on a good frame, which will be guaranteed to stand for a long time and whose plastic corners will not dug anywhere. I put acrylic baths for a very long time, different, over the past 5 years, the cast-iron bath put just 2-3 times, in all other cases, and this is a few dozen times, put acrylic. Nobody complains and on the contrary, everyone thanks me that insisted on the installation of an acrylic bath.