Drying gypsum plaster. Duration of frozen plaster. Duration of drying decorative plaster
Read also
Rotband (Translated from the German Red Line) is a variety of plaster known construction company Knauf. Such material is used as an aligning mixture under the finishing of walls ceramic tiles, wallpaper or paint.
Gypsum is used as a binder for this plaster. The viewed type of plaster is mainly used to align the surfaces from aerated concrete blocks and foam blocks, walls of ceramic and silicate bricks.
Gypsum plaster with their own hands - stages of application
And, in the end, such lights are inimitable in the joy they bring to the house. As they say, it is not a house without a hearth. The plaster wall is never easy for the first time, and getting a professional result is extremely difficult. Plaster requires a lot of time, although many people can easily raise it and can instantly remove the walls with plaster. We hope this page will help and provide some useful tips.
The final layer or the top layer of plaster is probably the most important, as it will be the last layer that will be visible, this layer of plaster is often called degreased. Skimming requires practice, so do not immerse yourself directly and do not shine a living room, do not practice in a small room upstairs that is hidden. If you spoil it, you can pass it again or if you find that you do not cut for plaster, you can call plaster.
Before answering the question about how much the Rotband plaster drifting, briefly consider its characteristics.
German plaster Thanks to a properly chosen raw material composition, there is a high indicator of environmental friendliness, and the gypsum binder, which is part of the material, allows to obtain a favorable microclimate indoor. This type of astringent allows you to regulate the humidity of the air indoor at the level of the norm - the extra humidity is absorbed into the layer of plaster, and with a lack of moisture is displayed.
There are certain rules that you must follow to get good results when removing plaster. Always mix the plaster by adding the water first, then slowly add the plaster and mix it well either with a wooden stick or mixer. If you are plastering the room, make sure that you do not try and take two walls that touch each other, or it will make it extremely difficult, as you damage one wall until you pass the other. There are two ways to apply the final layer of plaster, one method uses one layer of finishing plaster and the second method uses two layers of finishing plaster.
- First, make sure the surface is ready for removal!
- Plasterboard or protective covering You can remove without surface preparation.
- Any tiny pieces of old plaster can make plaster nightmare.
Rotband plaster comes in construction stores as a finished dry mixture in paper bags of 5, 10 or 30 kilograms. How to prepare a working solution can be found from the instructions on the package.
Typically, such plaster is applied by one layer, leveling the irregularities of the base of the base to 3 centimeters. Before applying the plaster on the surface, the base must be prepared. For this purpose, the primer is used, which cleans the surface of the base from contaminants, bonds dusty particles.
All screws are lowered below the drywall surface, and the seams are sealed with self-adhesive scrubber. Turn off the electricity, remove the socket and label the wires. Do not turn on the electricity until you finish the plaster. Wet stucco Well carries electricity, and therefore you can burn with electric shock.
Start from the download of the haasting with the help of plaster, if the plaster will be correct consistency, it will not fall from the hawk. You can use your float to download the hawk or spatula. Distribute the plaster using the float on the wall so that the floating float is at an angle, do not attempt to use the float, as it will not work. The smaller the angle between the wall and the float, without the fact that the blade drops exactly, the better the finish will be! It requires practice, and sometimes you delete some kind of plaster, but practice makes it perfect.
It is important to remember that it completely dries by the Rotband long time, the drying is taken into the calculation 1 ... 1.5 millimeters of the material layer per day, depending on temperature and humidity. So that the plaster dried in the shortest possible time must ensure the correct temperature regime in the room (+ 5 ... + 25 degrees), and also ensure that dust does not fall on the fresh surface. With minimally permissible temperature The air indoor can be heated with a fan head fluent.
We strive to cover the wall as quickly as possible, but at this stage is not too accurate. As soon as the wall is covered, go around and clean the edges, wasting a large brush and removing any plaster that extends to any adjacent surfaces. Let the plaster dried a little, but not too much, it explains why the explanation on the web page becomes difficult! In principle, you do not want it to be too wet or too dry! 20 minutes in a cool day should be right.
Now, using your float approximately on the same corner of this picture, pour the plaster until it becomes flat, and all the tags will be removed so that the surface is smooth. Any depressions or dragging must be filled with several more plaster.
If we talk about the splotleeve of the wall from Rotband, then this work should be carried out only after the surface is completely dry. The drying time of the ROTBAND depends on the temperature conditions and the magnitude of the stacked layer. If the mixture under consideration is used to fill the floor, then further work It is recommended to be performed only after 6 hours after applying a primer coating.
This is done by wetting the wall, good technique is wetting with a brush and then a splash of water on the wall with a wet brush. Do not rinse it wet, you need only a few water passes on the surface to lubricate the blade when you polished it.
When you wet the wall, you can polish stucco, soaking the entire surface. The corner of the blade must still be so that it is at an angle to the wall. Try go to both directions so that the lines are not displayed. You need to push relatively hard, but it is not so difficult that you pull out the plaster from the wall. Leave the wall to dry, and in a day or so it will completely dry.
When working with any building materials It is very important to comply with the right technology so that the finish ended with success and the layer stood at least specified in the term instruction. So the question is how much the plaster dries is relevant at all time.
People often make repairs in their homes, as due to a limited budget cannot afford to hire a professional brigade, so you need to do everything yourself, but at the same time consider the experience of the masters, so that the final result does not disappoint. On many materials, the method of their preparation and the rules of work are indicated right on the package, so you do not have to look for anything else. But anyway helpful information It will never be superfluous.
I have a wet wall in my corridor due to the flowing gutter. The drainage chute is now fixed, but it is necessary to replace on the wall. After the pointer is redone, interior walls will dry yourself or will need to replace the plaster?
Packaging and storage
Humidity can occur for many reasons, and the correct diagnosis is the first step to solving the problem. At first glance, it seems that your dampness is caused by "free humidity" from the flowing gutter. The flowing groove can lead to water, and it should be immediately taken into account in order to avoid many inherent problems caused by humidity, such as deterioration of decor, mold, breaking wall and heat loss, etc.
Drying time depends on the basis
To answer the question how much the plaster should dry, you need to learn its composition. It all depends on which components are included in the mixture, since the process is understood when the process is understood when absolutely the entire layer has achieved the necessary consistency and does not have wet areas.
It is necessary to wait for such a state precisely, because if you leave moisture inside the wall, it can lead to premature wear. Also on the surface finishing material A mold may appear, from which it will be incredibly difficult to get rid of finishing works without rewarming.
Full correction of the cause of the problem is needed first. If there are disputes of mold, treat them using antifungal washing to completely eliminate the problem. Another problem that may occur - hygroscopic salts or "salt", in this case the problem area must be removed using a suitable physical barrier installed together with the right drug to prevent salt formation and finishing coatings. In this case, the black mold will not be present, but peeling and paint bubbles, streamlined paper and tidal labels will say signs.
So, how much does the plaster dry on the walls, will depend on its composition:
- . How much does the gypsum plaster drip? With favorable temperature conditions and dry climates, the process will last a week. If any parameters go beyond the limits of the norm, the operation can stretch for 10-14 days. In any case, it will be possible to visually determine that the process is completed by characteristic color change. Wet in appearance and dark surface will gradually become completely bright. It will be necessary to carefully inspect all the walls to make sure that in all places the material has achieved such a tone. After that, you can apply any finishing finish, but it is necessary to study the compatibility of materials.
- . How much driving cement plaster? Here specialists propose to calculate that one millimeter of the layer dries out per day. But for this again, favorable conditions are needed. For example, with an increased humidity, the process will be stretched for an indefinite period, because the material will not only give moisture itself, but also to gain it from the air. Therefore, after plastering, the boiler is often specifically flooded to dry the air. But the hair dryer should not be used, since drying should occur gradually, and an instantaneous operation can negatively affect the strength of the layer.
So to carry out the calculation, how many days the plaster dries, you can independently. To do this, you need to know the listed parameters and take them into account when conducting calculations. If there is an opportunity, it is better to choose to carry out a dry period to work on plastering when there are several weeks before the rainy season. This will significantly simplify life and get the ideal results of the repair.
How much does the plaster drip on different surfaces?
Salts may be present and will attract moisture, even if the initial problem is solved. In any case, you can wait to see if it dries, it will take several days, as well as to test the drains for leaks with the hose to save the waiting for a rainy day.
If he does not dry, it should be obvious. At this stage to clarify right solution The correct diagnosis may be required. For this type of work, warranties are offered from third parties. The answer depends on the material used for the construction of a wall and type of plaster. However, if you have a pink plaster in combination with fluffy white glitters on the surface, you will almost certainly have to replace the plaster. Ideally, with repair plaster or sand and cement with salt inhibitor.
How does the layer thickness affect the drying time?
Another important factor in response to the question of how long the plaster dries, becomes its layer. For example, the starting mixture is superimposed with a layer of 10 millimeters, because it is necessary to completely correct all flaws that were allowed when the walls are masonry. The level of distortion should not be too large, since the plaster also has certain limitations at the maximum thickness. So the correction of the shortcomings should not turn into the molding of huge failures. Therefore, when working with the construction of partitions, it is necessary to use the level.
How much put putty: Construction Forum - Repair and decoration of apartments, houses, cottages
Note: For the wall it may be necessary to take 6-12 months, depending on its design and conditions ambient. This plaster must dry by itself when the water penetration source is cured, but the wallpaper and painting coatings slow down this process.
This is my personal opinion, although as an artist and decorator, builders can have a completely different solution. Once the entire brickwork is waterproof, will naturally dry. From point of view internal plasterIf she did not blow up the existing plaster and still feels hardness, it will also dry and should not replace.
Thickness affects how much the walls are dry after plaster, as soon as possible. This is generally the key parameter to pay attention to. For example, when working with concrete, a decrease in the layer 2 times will reduce the material necessary for pouring the material by 90%. But with a tree, such an indicator is improved by only 40%, so you need to still take into account the material with which work is underway. It is also important that the prepared surface itself was perfectly dry and did not give their moisture plaster. therefore preparatory stage It will be fundamentally important.
At some point, the wall will dry by itself. Depending on whether the cavity is filled with injected cavity insulation, as it holds water and need to be pulled out. If the plaster is not damaged, you can hire a dryer for a week or so, and it dries the wall without the need to replace plaster.
The wall render is traditionally a mixture of sand, cement and other aggregates, which are then applied to the outer walls with the formation of a protective layer, which is an alternative brick masonry or facing. While the cost of sand and cement is rather cheap, work must be carried out by specialists, and scaffolding often required.
How much does the Rotband plaster drip? This question also worries many users, as manufacturers assure that their material can achieve the necessary condition in just 5 hours. It looks fantastic, but in fact, under ideal conditions, such an outcome is quite possible. It will be almost impossible to recreate them in practice, so it will still need to wait a couple of days for the fidelity of the result.
In addition, there are other options, such as silicone and acrylic visualization systems. But how much does the profitability of the walls usually cost? Upstairs: For new visitors to our site - this is just one dozen insightful prices for housing, which we created for you. Join thousands of other people who saved money.
We have created this page as a guide so that you can get a general idea of \u200b\u200bhow much this type of work is worth. Obviously, each work is different, and things like location, the age of the object and the number of necessary forests will affect the price.
How much to wait until the next operation?
And the main questions that worry every person before repair:
- . How much does the plaster hiss before putty? Before starting work, this sense is necessary to wait for the complete drying of the previous layer, which can take about 20 days. But it is not necessary to form events, as this can lead to cracking of plasters and have to start working again.
- . How much to dry plaster before laying tiles? Here it is even more important to wait for a complete drying of the plactered layer. Typically, the tiles are put in the bathroom, and this uses a special composition with the presence of sealant. So be sure to wait until all the inner moisture evaporates so as not to seal it in the walls. It is better to rebuild and take a break of days for 30.
- . How much does decorative plaster drip? It all depends on the selected composition. But in this matter, the essence is not so important because finish plaster It is not subjected to additional impact that might disrupt her peace.