Puttail consumption on 1m2 on plasterboard calculator. Consumption rates of different types of putty on meter square

Putty is a finishing composition that serves to equalize the surface by applying paints. Any type of putty must match GOST. To suit GOST, must be observed consumption of wipelovka, density, viscosity, color, drying time.

Depending on what type of paint will be applied, the putty can be divided into several types: unconite, finish, putty for walls, oil, adhesive, and facade. The consumption of putty on 1m2 directly depends on the mixture and the surface to which it will be applied. Therefore, the following should be observed. consumption rates of wipelovka:

- washing Washton - Consumption - 1.2 kilogram per 1 sq.m. This putty is perfect for in dry rooms. Washing Wood is considered to be used to perform data. It can not be used in rooms with high humidity. Also do not use it for processing and when aligning floors. There are the following wipers. Old: Old KR, LR.

Facade putty - consumption ranges from 1.2 to 1.5 kilograms. It all depends on the thickness of the layer, which is applied. This type of putty is used for facades, so it is also called the outer putty. The facade putty is resistant to moisture, so it can be used not only for finishing the external walls, but also for rooms with high humidity.

- putty - Consumption Excluding cement is up to 1.1 kilogram per 1 sq.m. But it also depends on the thickness of the layer, which is applied to the walls. This putty is used for the perfect alignment of the walls under pasting with wallpaper or painting.

Putty - consumption is 0.46 kilograms per 1 sq.m. Walls, and on the ceiling - 0.50 kilogram. If the adhesive putty is applied to a wooden surface, then consumption per 1 sq. M. It will be the following: on the walls - 0.33 kilograms, on the ceiling - 0.50 kilogram.

Washing plaster - consumption of putty is 0.9 kilogram per 1 sq.m. This type of putty is designed to align the walls and ceilings. It can also be used when embedding the joints of GVL and GLC. It is not recommended to use a putty to process the seams, to align the floor. With it, it is possible for one application to eliminate irregularities with a thickness of 5 millimeters.

Finishing putty - consumption is 1.2 kilograms per 1 sq.m. With it, you can create the most accurate requirements that are needed for final finishes. For example, if you apply a putty under painting, it is better to use a fine-grained filling putty, as you need a perfectly smooth and smooth surface.

Finish putty - cost of 1 sq.m. 1 kilogram. This type of putty is used for the finish layer, lamination. Sealing cracks, imposing connecting tapes, etc. In this putty there are vinyl binders. This putty is already ready for use, so before work it does not need to be breed and mixed, it is enough just to pour the contents in the bucket.

See also topic:

1m2 powdered consumption

Consumption building materials - The burning topic for everyone who is undermining the repair. Even starting work, many do not know how much of this or that building material will be required. It often happens that there is a need to go to the store several times to buy goods or have to pay for its delivery. Thus, weighty additional additional costs are incurred. In the worst version, hire unscrupulous workers, hoping for their experience, and those using the inexperience of the employer, take the material with such a breath, so that it was then to steal. If you want to avoid unnecessary costs, it is better to know the accurate consumption of materials in advance. Of course, calculate the consumption of materials up to one hundred grams of paint and sand buckets is difficult, but such accuracy, in principle, is not needed. The most important thing in this business is to be guided by the fact that manufacturers of materials on the package are written. In this article we will tell what should be the consumption of putty on 1m2.

The putty is a finishing composition that serves to equalize the surface for subsequent paint application. What kind of type it was not, should correspond to the GOST, therefore its density, viscosity, color, drying time should be strictly observed.

The putty is divided into several species, depending on what kind of paint will be applied. It can be a wind, finishing, putty for walls, oil, adhesive, gypsum and facade. The consumption of putty on 1m2 completely depends on how to mix it, as well as from the surface to which it will be applied. There are the following letters of consumption of putty:

The expenditure rate of a 1.2 kilogram of 1m2. This putty is wonderful for internal work In dry rooms, it is considered the best in use to perform data. In rooms with high humidity it is better not to apply, as well as when aligning floors and for processing seams.

The consumption of facade putty is from 1.2 to 1.5 kilograms, depending on the thickness of the layer to which it is applied. This putty is used to finish the facades, and is often called the outer putty. It is resistant to moisture, so it is successfully used not only for finishing the external walls, but also for internal works in rooms with high humidity.

Consumption of walls of walls, but excluding cement, up to 1.1 kilogram per 1 m2, but it depends a lot on the thickness of the applied layer. It is applied on the walls and it is not better suitable for alignment of the walls under pasting wallpaper or painting.

Consumption of putty on 1m2 adhesive is 0.46 kilograms - it's on the wall, and if you apply it to the ceiling, then 0.50 kilograms. If the glue putty is applied to the wooden surface, then in this case the flow rate will be as follows: 0.33 kilograms - 0.33 kilograms on the walls - 0.33 kilograms.

The consumption of plastering plaster is 0.9 kilograms per 1 m2. It is designed to align the walls and ceilings, sealing the seams of GVL and GLC. It is not recommended to apply a gypsum wipe to process the seams and is not recommended for alignment. However, it will help in just one application to eliminate irregularities with a thickness of up to five millimeters.

The finishing putty is spent 1.2 kilogram per 1 m2. With its help, the final finish can be used as precisely as possible. If the finish putty is applied under painting, it is better to use with fine-grained filling, and it will create a perfectly smooth and smooth surface.

Another finish putty - the stroke has a cost of 1 sq. M. one kilogram. This type of putty is carried out finishing and lamination, sealing cracks, the imposition of connecting tapes and the like works. At the heart of the composition of this putty, the vinyl binders lie, it is sold ready to use and before work it is not necessary to breed and mix.

Consumption of putty on 1m2 »Construction and repair by hand

Planning repairs, each host begins to calculate the number essential materials. This is done for various reasons. The most important thing is that it is savings, because the materials purchased just in case no one will buy you, you will not be returned. Why overpay, you can count everything in advance. It happens that during the already started construction work It is found that something is missing, you have to spend time to get paint, primer or putty. And repair at this time is worth it. In addition to all this, the hired workers can simply get caught dishonest and steal part of the material, as if it was not. It is about these reasons that it is considered important to calculate at least an approximate amount of necessary materials for repair.

The putty is necessary for alignment of the surface, it must correspond to the GOST for its density, color, viscosity and drying time. There are several types of putty, which will depend on the amount of this material that will be spent on each 1m2. It can be uniform, finish, putty for walls, adhesive, facade, gypsum, oil. It is also important how to mix it, and some other surface to apply.

The vetonite is remarkably suitable for internal work, the rate of consumption of this type of material is 1.2 kg per 1m2. The facade putty is consumed from about 1.2 to 1.5 kg per 1m2. Of great importance is the thickness of the layer to which it is applied. This kind of material under consideration is used to finish the facades, because it is resistant to humidity.

Putty for the walls is consumed to 1.1 kg per 1 m2 and is ideal for alignment of walls under and pasting with wallpaper. The glue putty on the wall is usually consumed 0.46kg per 1m2, and on the ceiling -0,5kg. But at the same time, if the glue putty is applied to the wooden wall, then the flow parameters will be slightly different: on the wall -0.33kg, and on the ceiling - 0.5kg per 1m2.

Gypsum putty is necessary for leveling ceilings and walls, its consumption is 1.2 kg per 1 m2. It can not be used to equalize the floor or grouting seams.

With the help of finishing putty, you can make the final decoration of the room. Its fine-grained filling will make it possible to create a perfectly smooth and smooth surface. Its consumption is 1.2 kg per 1 m2.

Thus, knowing what to put out and for what purpose, it is possible to calculate the materials necessary for the repair.

Puttone - finishing, plaster putty, facade putty for walls

Putty or putty (special) is a mixture used for thin-layer finishing alignment of facade, wall, ceiling and other surfaces. Application thickness is usually no more than 5mm. There are two main types of material: pasty, ready for use, putty and dry mixtures in the form of powder. Dry powdered putty are produced on a plaster, cement or polymer basis, which is one and important criteria for their classification. The mixtures contain a variety of modifying additives, among which you can allocate: fillers (talc, chalk, barrit), film-forming substances and pigments (ocked, zinc-like). In the process of manufacture, strict proportions are observed. The content of fillers and pigments is 5-12 times less than film consumers. From an accurate "ingredient" composition of mixtures, their operational physical and chemical characteristics are directly dependent.

The main task that helps to solve the construction dry mixtures of putty are preparing before further trim (paint, with wallpapers, etc.). Each type of material is used in a certain type of work. Cement moisture resistant putty applied to outdoor decoration Buildings and leveling of the inner surfaces of wet rooms, which is associated with the resistance of cement to water and humidity. Gypsum putty serves solely for internal work. For the final, concluding alignment of the walls, apply finish wipelukmanufactured based on polymers. Finish cement putty made of modern dry mixes, hung, forms a smooth surface of a homogeneous white color. It does not give shrinkage, bubbles and cracks, and the resulting aligned surface is not cooked and does not appear, it is easy to grind up with an abrasive skurt.

For each surface, there are types of coating materials that allow efficient and efficiently perform work. Specialized building stores perform sale of padlocks on hypocarton, facade spacure, putty for brick walls. Mixtures can be designed for wood, metal, brick, concrete and other types of surfaces.

The putty does not give a reliable clutch of the substrate with covering layers of the coating, in connection with which it is recommended to perform primer. Before starting work, dry mixtures are bred by water, taking into account the specified proportions. Depending on the type of material, whether it is a wrathless, facade, gypsum or cement, a special toolbox is used. Thick plastic masses can be applied by a plastic or metal spatula or a piece of rubber. Solutions are usually applied by pneumatic spraying.

The use of putty for sealing movable seams, joints, filling holes, as well as welded and riveting seams, provides, as a rule, several layers, with a thickness recommended by the manufacturer. Online store "Repair-Delivery" performs sale shpatlevka The following famous brands: Vetonit puttonit (vetonit), (Knauf), putty and others.

We specialize in selling all types of building materials, ranging from construction blocks and ending with finishing materials. The plaster, putty (cement, gypsum and finishing) can be directly delivery to the place specified by the Customer. Our employees transport and ship goods purchased by you. The putty of facades, walls and regiments is sold at a price, the most suitable for Moscow and the region. Store specialists are ready to advise you in choosing a product, you only need to call our operators on the specified phone.

Sell \u200b\u200bbuilding materials - it sounds daily and habitual. But we do not just sell, but we provide you with the highest quality and best Materials Construction. Here you will find winter putty, walls, gypsum spacure, finished putty "prospectors" and much more. Prices will please you with pleasure.

The putty is a finishing material that is designed to align the working surfaces before applying paints or wallpaper, embedding the slots, finishing facades. All types of putty must comply with GOST. Their compliance is to comply with density, viscosity, colors, flow and drying time.

There are several types of putty, which are used depending on the type of finishing work. The use of putty on an area equal to 1 m2 directly depends on the type and quality of the surface being treated, and on the species of the used putty.

Consider the consumption of several species of putty on 1 m2

1. Wetonite - putty is designed to work inside dry rooms. This is the most common view finishing materialused for this type of work. There are two types of wipelovka vetonite - Kr and LR. Wetonite cannot be used in rawrooms, when processing seams, alignment of floors. Woven consumption is 1.2 kg per 1 m2.

2. Facade putty is used to finish facades. It is resistant to high humidity, so this kind of putty is used for external work and premises with elevated and large moisture. Depending on the thickness of the layer applied to the working surface, the consumption of putty can be 1.2 - 1.5 kg.

3. Putty for the walls is designed for finishing wall alignment under painting or wicked paste. The consumption of this putty also depends on the thickness of its application on the wall, and on average is 1.1 kg per 1 m2.

4. The glue putty is used for internal work when aligning the various surface defects of the ceiling, wooden and concrete walls, which subsequently should be covered with paint or wallpaper. This putty includes glue, chalk, olifa and other additives, which increase the strength of the material and the ease of its application to the surface. The flow of this putty depends on the type and quality of the treated surface. If it is a wooden surface, then on 1 m2 you need: for walls - 0.33 kg, for ceiling - 0.5 kg. For any other surfaces, the amount of powder used is 1 m2 - for the walls 0.46 kg, for the ceiling - 0.5 kg.

5. Gypsum putty is used when aligning ceilings and walls, as well as for sealing the seams of GCL and GKVL. It is not recommended to use a gypsum powder for alignment of the floor and seal seams. The thickness of the applied layer should not be thicker than 5 mm. The consumption of plaster powders is 0.9 kg per 1 m2.

6. Finish putty is used for final finishing surface surfaces. Under painting of surfaces, you need to use fine-grained finishing putty to create an ideally smooth and smooth surface.

7. Puttychka stroke is used to create finish layers, laminating surfaces, seal cracks, imposing connecting tapes, etc. The base of the putty is the vinyl binder. The flow of this putty on 1 m2 is 1 kg. Puttyching is sold ready to use, it does not need to be breed and mixed before work.

Putty - material used to align and smooth surfaces of various character. With it, it is possible to perfectly smooth the irregularities on the concrete ceiling, a pre-plastered wall, plasterboard sheets or on wooden surfaces.

The use of putty ensures the perfect result of the final that is why it is important to correctly select the material suitable for the surface, as well as most accurately calculate the consumption of putty on 1m2.

What are the wipelovka

Puttleship differ from each other's basis - in what is used as a binder component. Basically, the binding elements are divided into cement, gypsum and polymers. There are a number of special putty on adhesive or oil base.

Polymer-based putty is the most elastic and practical, it will quickly dry, it is easily rubbed, it is not tightened and does not crack. The price is sufficiently high, and the spectrum of application is mainly limited by internal finishing works.

Cheaper material for interior decoration Walls is a plaster-based putty. Elastic, comfortable in applying and not tightened, it also dries quickly and easily polished, even dry. The lack of gypsum is bad water resistance. In the cheese and wet room, it is best not to use this material.

High water resistance and resistance to temperature differences has cement putty. This material has the highest consumption per 1 m 2, but it is great for facade work, finishing rooms with high humidity and unstable temperature, such as bathrooms, basements, saunas or

What depends on 1m2 consumption

The instruction on the packaging of the material usually includes an approximate consumption of putty on 1m2. However, it does not always take into account various characteristicswhich may affect surface processing.

The consumption of putty on 1m2 depends on a number of conditions and characteristics, among which:

• The level of surface preparation - twisted and covered with primer walls require fewer material, while smoothing uneven surfaces with a large number of flaws will increase much more putty.
• The surface nature of the surface - the consumption of putty on 1m2 drywall differs from the consumption of the same material per square meter of the concrete surface. The tree does not tolerate the thick layer of putty.
• Types of finishing works - starting usually requires more material and almost twice the flow rate to 1m2.
• The level of work is a professional has the practically intuitive knowledge and understanding of the nature of the surface, as well as the quality and amount of the required material. The newcomer or an amateur will need not only longer, but more and effort, and building materials.

How to calculate the consumption of putty on 1m2

Approximate consumption of the mixture on cement based At layer of application in 1 mm ranges from 0.8 to 1 kg per 1 m 2. Putty on a plaster basis, by virtue of greater elasticity, is consumed with the calculation of 0.5-0.6 kg per 1 m 2 with a millimeter layer.

To correctly calculate the amount of the required mixture, it is necessary to carefully study the surface, approximately determining the required layer thickness; Then count the area of \u200b\u200bthe treated surface. The approximate number is calculated by the formula:

• surface area * layer thickness * material consumption.

For example, it is necessary to stick a slightly uneven wall with an area of \u200b\u200b12 m 2, for this, covering it with a layer of 5 mm thick, using a cement-based mixture. With such data, the material calculation formula will look like this: 12 x 5 x 0.9 \u003d 54 kg.

Consumption of some finished mixtures

Ready for use The material is sold in plastic buckets and does not require a preliminary kneading. Among the brands are popular today, "Knauf", "Log", "Wetonite" and Ceresit can be distinguished.

The basis of the putty "stroke" - gypsum, besides, there are a number of polymers and vinyl, which makes it very elastic, with a layer of 1 mm on 1 m 2, approximately half aologram of the mixture. 1m2 consumption is more kilograms; By virtue of natural, but severe binders, such as cement, sand, limestone and minerals, 1 mm layer required approximately 1.2 kg of putty.

When calculating the amount of the mixture, it is worth considering a small amount of material that will remain on the walls of the working capacity, on the rule and spitel. Just in case it is better to purchase a few kilograms of putty more than with the initial calculation.

Who is engaged in finishing work professionally, knows to calculate the consumption of putty on 1m2 always need to consider numerous factors. If they are wrong to take into account, it may be an unpleasant situation. It turns out that there is not enough such material to complete the work. This, in turn, will lead to the fact that it will have to spend time on the preparation of a new mixture that will need to be successfully docked with the already applied.

To avoid such a development of events, it is necessary at any work, and especially with putty, to make a preliminary calculation. Only then can be obtained exemplary indicators and answer the question: how much material is needed.

There are many types of materials. Each of them has its own purpose, which must be considered when calculating the consumption of putty per square meter. So, at the initial work when the "blacknaya" wall preparation occurs (sealing large irregularities, cracks) uses starting putty. Before application decorative coating - Applied. There are also other species (in their intended purpose) - to level the surface of the ceiling or restoration of various coatings. How many of them are required - separate counting.

It follows the surface itself. Accordingly, if the wall has numerous irregularities, deep cracks, height drops, it will take a lot more mixture on it than to the surface that does not have such characteristics. Therefore, initially you need to build an object so that it has the smallest number of defects and curvature. We must not forget about the experience of a master who is engaged in the starting layer. Numerous flaws that appear after such work will require more finish mixture. Condition is also taken into account ambient, and the quality of the cooked solution.

Correct the volume correctly, this is an important stage of work. You can not only make a mistake in a smaller side, but also in a big one. Then it turns out that a huge amount of putty will be unclaimed. And nothing can be done with her. This concerns dry mixes. As a result, it may be that much more cash has been spent than planned.

Important! Any "theoretical" calculations must be adjusted at the place. That is, it is impossible to trust them completely, they contain averaged values \u200b\u200bthat do not take into account the real state of the surface.

Consumption rate on various surfaces

The putty is applied mainly to the following surfaces:

• which were already covered with plaster;
• decorated with plasterboard sheets;
• others.

Plaster

When calculating the norms on the plastered surface, the indicators are immediately taken into account external environment. Therefore, work should be performed exclusively in the climatic range, which is indicated by the manufacturer of the mixture.

For a prepared surface that does not have significant flaws, there is a standard norm for the required material. One square meter requires one and a half kilogram of material (approximately). This, taking into account all the conditions specified by the manufacturer.

When working with starting and finishing compositions, it is impossible to forget that much depends on the thickness of the applied layer. So, with a thickness of one millimeter, the main mixture requires 1 - 1.2 kg / m2. And with the finish coating, the thickness of which is no more than 0.5 mm, it is necessary to 0.5-0.6 kg / m2. Accordingly, the thicker and more the number of layers, the noticeable consumption.

Example. Dana wall, there are minor irregularities and cracks. Its area is 8 square meters (2.5 * 3.2). You can calculate what happens:

• Consider average flow The starting mixture is 1mm, it is 1.1 kg / m2. The layer thickness will be 4 mm (4.4 kg / m2). We obtain that on 8m2, at 4 mm layer, you need: 8 * 4,4 \u003d 35.2 kg - dry mixture. BUT! Here you need to add an error + 10%. Total: 35.2 + 10% \u003d 38.7 kg.
• Based on the available data, we obtain the flow rate of the finish layer on the wall. Its thickness will be 1 mm. We obtain that (on 1m2) you need 1.2 kg of the mixture. Total: 8 * 1.2 \u003d 9.6 + 10% \u003d 10.6 kg of dry mixture.

Plasterboard

His sheets are better to handle the primer, then the amount of material required will decrease. This rule is effective for other surfaces. So, how much it takes a spacion mixture:

1. Based on cement. The most expensive way, because by 1 square meter accounts for about 1.2 kg.
2. With a gypsum composition. Less costly method. 1m2 consumption is approximately 1 kg.
3. On a polymer basis. This material is the most expensive, but economical. Its per square meter you need only 0.6 kg.

With plasterboard work is much easier. If the installation was performed correctly, it will not be required to be equally aligned. The main thing is to close the joints and gaps, nails hats, and apply the finish coating. Given the size of the sheet, you can immediately calculate the mixture, which is very convenient.

Other surfaces

As in other cases, the walls are ground. So, the consumption of putty on 1 m2 on the concrete surface is not particularly different from the rest. The main thing is to take into account the number and thickness of the layer. Usually in such areas of operation it reaches up to 1 cm. Wood walls and wooden walls. Only here you should apply a very thin layer, not more than 2 mm.

On a note! Other factors affect the consumption of putty. For example, a lot of material can remain in a bucket or on the instrument. Also, many simply do not have time to apply the mixture. It solidifies and no longer go to use. It is advisable to take into account, giving a response to the question: how much is the putty?

Most often use putty on a plaster basis. She is suitable for finishing interior premises. Its average consumption ranges from 0.8 to 1 kilogram per square meter. It is for the surface without flaws. If they are, then the layer thickness can reach up to 10 mm. Then according to the calculation, the consumption is up to 9-10 kg / m2. Such thickness implies a lining at least twice. Otherwise, the frozen solution will begin to fall off.

Finish spacure

The consumption of putty depends on the previously done work. If the main layer was properly applied, the flow rate will decrease significantly. In most cases, it will be 1-2 mm. Accordingly, the consumption of material in the area is 2 kg per square meter. Preliminary preparation Walls are an important process.

Finished spacure

Everything that was considered above related to the mixtures that are sold in a dry form. But there are no materials that do not need it. They can be used immediately after purchase. In its composition, they are very diverse. It is precisely because of this, they are much more economical in terms of consumption than their dry beats. That's just a high cost - their main drawback.

Calculate the consumption of putty on 1m2, it is not an easy task even for a professional. Many diverse factors affecting the amount of material should be taken into account. Any calculations are purely individual, there are no common indicators that could be used with confidence. Therefore, it is advisable to lay an error. Only then will turn out indicators that will be close to real flow putty on one square meter. And the answer will be received: how much material will be required.