What a decorative plaster is good. Plaster Coroed: Material Features and Application Technology

For the first time hearing about the decorative plaster of the coroede, immediately pops up the association with a not very pleasant view of the beetle devouring wood. The fact is that traces left by insect on the surface of the wood and drawing after applying finishing material, incredibly similar to each other. From this she received such an unusual name for the building material.

Features of the facade coast

Decorative plaster Coroede is acrylic and gypsum. Acrylic is a material fully prepared for application. Plaster on a plaster basis is a dry mixture, which must be pre-prepared for applying. The material itself is a mixture of composite composition with numerous small granules from marble or mineral crumb. The grain of the material and its final appearance depends on the size of the granules.

Benefits

Coroede has a lot of advantages. Consider some of them.

• The material is incredibly durable, reliable and environmentally safe, as it consists only of natural components.
• The mineral filler makes the composition lightly, which prevents an excessive load on the building structure.
• Material is resistant to any weather changes. Perfectly tolerate low temperatures and direct sunlight. And even shower and hail is completely small.
• It has refractory properties and under the influence of the Sun does not lose the original brightness of the color.
• It is incredibly easy to care for such material. The plastered surface can safely wash with a small amount of detergent. Highly an important point It is believed that on such a material, mold and fungus are not formed.
• Coroede is difficult to damage. It can be cleaned with a rigid sponge and even a vacuum cleaner.
• Huge color gamut. As a rule, plaster has white color. But it is later possible to paint in almost any shade.
• Material is one of the most popular. Differs small cost and availability.

disadvantages

There are small disadvantages from the Coroeda.

• If the plaster has undergone serious mechanical damage, it will be difficult to eliminate it without loss of appearance.
• The material is not easy in applying, so this work can be entrusted only by a qualified specialist.

Application technology

The first thing to be done before directly applying the material is to carefully prepare the surface. To do this, the beacons are installed on the work wall and the surface of the plastering mixture is installed on them. With the internal finishing of the surface, several layers of putty should be applied. The material in this case should be strong enough to avoid its destruction when scrolling the cored. After applying all the layers of putty, there are plastered walls.

The next step is to apply to the surface of the primer. For this, the best acrylic primer is best suited. Such a composition will perfectly protect the wall from moisture absorption when applying plaster.

Now you can directly proceed to applying the mixture. To do this, you must first choose the material suitable for certain purposes. For example, fine-grained plaster is best used for interior decoration interior. The middle and coarse material is great for finishing the exterior facade of the building. Most often, the composition of the plaster is fully prepared for applying.

Watching the cored is best produced by a steel spatula. If it is necessary to stack not the entire surface, then the adjacent walls are best to isolate with painting tape. This will avoid strong pollution. The most complex in the application of the koroed is observing a certain thickness of the layer, which must correspond to the size of the grain. Application technique is similar to a spheres. At the same time, the material is stretched over the surface until small furrows are highlighted on it.

To create a material texture, as a rule, a plastic grater is used, with which the circular motions are carried out according to the freshly abandoned plaster. Supernsitia is not worth doing. The initial figure may not have a particularly attractive appearance, since the final texture is achieved when the plaster dried a bit. And again it must be polished by a plastic grater already with the application of some effort. If the plaster in the first passage could stick to the grater, then in the second - it is completely excluded. And if it happened, it is necessary to wait for some time so that the material is good back. This is the most responsible moment in the formation of the pattern. Therefore, it is important here to observe accuracy and follow the uniformity of the formation of the pattern.

The final stage of the application of the kororad is to be cleaned by a grater of all joints.

After complete drying, the plastered core surface should be covered with varnish. The most suitable is acrylic varnish. It happens to matte or glossy. Before applying the varnish, it is necessary to coat the surface with the ground. Then apply several layers of varnish with a steel spatula. As a result, it turns out an excellent coating that is pleasing.

Painting

Since the initial plaster is white or gray, the surface wants to give a more attractive shade. And it is completely simple, because the coroede is perfectly painted in a wide variety of colors. You can give the necessary shade by adding a small amount of dye directly to the plaster mix itself. However, you can also paint the finished surface. For this, it will be great:

• water-emulsion;
• acrylic;
• silicone paint.

But in this case, it is necessary to acquire a composition suitable for staining.

To paint the surface, it is best to use a wide brush. It can also be done with a roller or a special veasage. If you paint the surface with a short pile roller, then you can get a pretty interesting pattern. Grooves will not be processed, so the main drawing will be clearly visible. With the help of various paint techniques, the surface can be given the most diverse view. For example, you can easily create an effect under ancient or make some luxury and gloss, using gold or silver shades.

The cost of finishing material

The price of the facade plaster Coroede is quite acceptable, if we compare it with the cost of other materials for finishing the facade. For example, a 25-kilogram bag of plaster can be purchased for 300 rubles, under painting for 550. While the price of some types of mineral decorative plaster can reach up to 4,000 rubles for the same amount.

Since the application technology of a core is not very simple and requires the necessary skills and skills, it is better to entrust it to qualified specialists. On average, it is about 500 rubles per 50 m² on average. This cost, as a rule, includes pre-applying primer.

Care and operation

Plaster Coroede is incredibly easy to care. The plastered surface can be wiped with a damp cloth, a soft brush and even clean with a vacuum cleaner. The operational characteristics of the material is quite high, it is difficult to damage. Therefore, long years can be enjoyed attractive external species facade.

Construction Plaster "Coroed" - Decorative mixture used for the inner and external decoration of buildings. Its main feature is a unique texture of the surface, imitating damage to the natural wood insects. The depth of grooves is determined by the size of the grain and varies depending on the specific mixture.

The main characteristics of the plaster "Coroed"

• Structure.

  Decorative plaster "Coroed" is construction mixture, the basis of which is the binder and filler from small pebbles (usually marble crumb). Also, the mixture may include all sorts of additives that improve the performance characteristics of the material.

• Purpose.

  Depending on the binder The "Coroed" plaster for the facade or interior decoration of the building is used. Acrylic mixtures are well suited indoors. The best facade plaster "Coroed" is manufactured on the basis of silicone resins. Such a finishing coating provides the building perfect climatic protection.

• Consumption.

  This characteristic directly depends on the size of the grain of the filler. The larger the diameter of the mixture of pebbles, the higher the consumption will have such plaster, the "Coroed" with grain 1mm is the most "economical" (from 1.5 kg per 1 m 2). To compare the solution with a grain of 3 mm, it will take almost 3 times more (3.8-4 kg per 1 m 2).

• Cost.

  "Coroed" - plaster, the price of which can differ by an order of magnitude depending on the binder used. The cheapest - mineral mixtures (from 14 rubles / kg), and the most expensive - silicone (up to 150 rubles / kg). "Golden middle" - acrylic decorative plaster "Coroed", the price of which varies from 60 to 100 rubles. / Kg depending on the size of the grain and manufacturer.

• Technology.

  Applying the plaster "Coroed", as well as any other textured simulated coatings, includes two main stages (not counting preparatory work). Initially, the mixture is evenly distributed over the surface with a layer thickness corresponding to the grain diameter. The second and most important creative stage - rubbing a non-frozen solution with a plastic celma. Here the quality of the drawing will directly depend on the artist's skill.

If you need a high-quality and inexpensive plaster Coroed, you can buy it in the Bau-Store online store. In our assortment, mineral, acrylic and silicone mixtures with different grain size from leading global manufacturers are presented in our assortment. Also, Bau-Store also provides professional selection services for the selection and installation of finished facade heat-insulating composite systems (SFC).

Hello Sergey,

If the choice of plastering is still relevant for you, and the savings are not the only criterion, I want to offer you the use of the Material of the German company STO AG. Direct from the manufacturer.

To begin with, I wanted to clarify what type of plaster optimally meets your needs.

Organic plaster Supplied in ready-to-apply applying in buckets. They have good elasticity, which makes them especially resistant to the appearance of microcracks when shrinking the building.

Organic plaster Stolit. Additionally enhanced by fiberoloks, which makes the optimal ratio of the strength and elasticity of the material. Stolit. Does not require additional finish coating, because it has good water repellent properties. Correct in a wide range of colors and shades. This allows you to save financial and temporary costs.

Cost Stolit R. (Coroed) 2 mm (caliber) white per m2 excluding object discount 426.60 rubles.

Before applying plaster, it is recommended to apply adhesive soil Sto-Putzgrand..
Its cost in white 52.72 rublefor m2 without taking into account the object discount. When applying the "Coroed" in the color version, the soil must be painted in the same color to reach the coating monotony in outer plane and grooves.

Inorganic plaster Supplied in a dry form in bags. It is prepared on the object before direct application. Inorganic plasterers have the greatest vapor permeability, non-flammings. Inorganic plaster require additionally finishing paintwork. In comparison with organic, have a cost gain.

The cost of inorganic plaster STO-STRUKTURPUTZ R 2.0 for m2. 163.20 ruble Excluding object discount.

It is recommended to use adhesion coating. Stoprep Miral.. Cost per m2 in the white version 49, 39 rublesexcluding object discount. Soil is tied. When using the finish colored coating, it is recommended to use the soil of the same color as the finish.

In order to prevent overhead errors, and for accounting for any subtleties, we are ready is free Organize leaving your object of a technologist. It is on the site of the object technologist will be able to offer the optimal solution for you.
If necessary, ready to arrange delivery.

The cost of products is shown without a discount and tinting.
Taking into account the current promotion to all specified positions. 15% discount is guaranteed. Based on the scale of your object, I can offer additionally especially favorable conditions.

You are people talking about the real price and real consumption ... Wishing to work STO immediately will drag on ... when the plant build, then you can talk about mass sales, today the sto materials are too expensive!

The durability and resistance to the wear of the entire building depends on the quality of the outer decoration of the walls. Therefore, this question does not tolerate the surface relationship. Let's still talk about how beautiful and durable can be the facade of the house photo of private houses Coroed plaster on which used for decoration are presented in the selection.

Among the huge number modern materials For the facing of the external walls of buildings, the plaster of the croroede for facades is especially highlighted. This building material can be purchased as a dry mixture or a ready-made solution based on a mixture and cement and polymers (acrylic, silicone, silicate).

The plaster of the koroed photo of which is presented below, is actively used to finish the facade of buildings of various purposes:

• residential fund;
• administrative buildings;
• industrial facilities.

Due to the presence in the composition of a specific filler (granite, quartz or marble in the form of small-sized fractions), the surface, the finish of which is made by the core, acquires the original texture and an unusual look. Often, this type of plaster mixtures has a white color, but it is quite actually painted in any other color shade. That is why the koroede does not limit the flight of the designer's fantasy in terms of choosing the pattern and the color solving facades of buildings and structures.

Advantages and disadvantages

If you want to give the facade of the house durability and practicality, perform his finish with a plastering mixture of the core. Photo of private houses, lined with plaster Coroed, are presented below. Their attractiveness and non-standard design is difficult to overestimate. But this is not the entire list of advantages of this material:

• as part of plaster present natural componentsMaterial is environmentally friendly building material. In the process of applying decorative plaster, the cored for the surface of the master does not have a risk of obtaining a dose of radioactive radiation or poisoned by harmful components released by a mixture;
• intensive level of adhesion, elasticity;
• high hydrophobic performance, vapor permeability;
• affordable price category;
• high degree of resistance to deformation processes, mechanical exposure, temperature regime drops, long-term exposure to sunlight, open fire;
• bactericidal properties ensure the stability of the facade to fungal microorganisms, mold;
• when using such a decoration, the building walls are not aggravated by its weight;
• with the help of special varieties, it is possible to give the walls additional sound and thermal insulation.

Decorative plaster Coroed has the weaknesses. Its disadvantage can be called a tendency to operational solidification and the need to strictly adhere to technology when the solution is kneading. If the moment is missed, the mixture was hardened in the container, it is impossible to attach water into the solution. Otherwise, the quality of plaster will significantly decrease, which will lower the service life of the facade and its operational parameters.

Types of coast plaster

Today there are several types of decorative plaster cores. The photo below demonstrates a residential building with such a finish.

Species diversity of plaster mixes Coroed:

• mineral - serves without loss of initial operational parameters for more than 5 years. Demonstrates high strength to wear;
• acrylic is the most popular view among the domestic consumer, as it has high quality and affordable cost. Serves without loss of operational parameters for more than 10 years;
• silicate - has high strength and antistatic characteristics, vapor permeable;
• silicone - the most durable, but expensive value option. Such plaster will last for more than 25 years, not losing its attractiveness and strength.

Depending on the type applied, the material application technology will have its own specifics.

Acrylic

Mineral Silicate

Silicone

TECHNOLOGY OF THE FACADE OF THE HOUSE OF THE FUND COROD

Apply such a decorative plaster on the facade of the house in two ways:

• independently using hand tools, which allows you to save on the cost of renting automated equipment;
• with the help of special equipment for applying plaster capable of cutting the time to work several times.

Machine drawing plaster

Regardless of the selected method of working with the material, the application technology must be performed on strict rules in the following sequence:

• preparation of the surface to finishing;
• preparation of the solution;
• application on the surface of the plaster cored;
• finish painting facade.

Consider each of the stages in more detail.

Tools for work

To prepare the solution of plaster, the capacity of the current size will be required (depends on the amount of work), a building mixer or drill. For subsequent work with decorative plaster, with their own hands, you will need to have a series of tools. Apply the material to the surface with a spatula. It is better to choose several products different size: For smooth surfaces, a large spatula is relevant, and for hard-to-reach places (corners, protrusions, niches) it is better to have a small tool in size.

If an automated method of working with decorative plaster is selected, then it will be necessary to get a special cannon for applying a core on the facade of the house.

Also when working with the core, you need graters, knife, rule and cutting. They will allow working with the material quickly, without difficulty. And for painting the facade, it is good to choose rollers or different in the size of the brush. The size of the tool is selected as in the case of a spatula: wide tools for smooth bases, small - for hard-to-reach places.

Tool for applying plaster

Surface preparation

To begin with the surface of the facade at home you need to remove the old finish: a plaster layer, paint, decorative panels, other materials. Further, to achieve the best adhesion of the finishing material with the base, it is pre-primed by special compositions. Experienced masters advise to choose the composition of the same brand as the plaster of the Coroede. It is also desirable that she is white. Then dark stains from the soil will be shuning in the stucco mass of this species.

Primer facade

Priming is produced in several layers until the surface of the walls of the task will acquire a homogeneous white color. This is necessary to increase the durability of the facade and giving it aesthetically attractive type.

If an expensive primer is selected, it may be enough for only one layer of material, since the quality product from advanced producers is often distinguished by thick consistency and fills the base micropores.

Alignment of the surface under the plaster

Preparation of mixes

When preparing a plaster mortar, it is important to strictly follow the manufacturer's recommendations specified on the package. Thus, you can guarantee the facade of the house quality and long-term facing.

The plastering solution of the suspension can be used immediately after the acquisition. The main thing is to carefully move the material before use. If a dry mixture is purchased, it will be required to dilute with water, following the recommendations of the manufacturer's recommendations regarding actual proportions.

Water is heated to a temperature of 20 ° Celsius, and then a dry component is added gradually into it. The solution is thoroughly interfere with the construction drill, in order not formed lumps. For these purposes, a building mixer is also suitable. After cooking, the solution cannot be left for a long time, otherwise it solids and will not be suitable for use.

Cooking plaster

Features of application

The first layer of plastering is applied by smearing movements "in spray" in advance of the beacons in advance, then the surface is spilled by the rule. To increase the strength of the facade, it is worth applying the reinforcing grid.

Plastering the wall, pre-secure beacons

So that the facing looked monolithically, did not have level drops, as well as that the seams were not transformed on it, it is necessary to adhere to the continuity of applying material. Each new section of the wall should be shrinking with a previously angry area. Therefore, experts do not recommend allowing breaks in work. But if it is extremely necessary, the limit of the solution will be needed to be sealed with a construction belt, and then wrap the layer of plaster. When the work resumes, the tape is removed.

The mixture is gained by Kielma

The composition is applied by preliminary markup

Placement overlay

In order to prevent the splines of color and textures based on, it is necessary to apply the composition of not only one brand, but also one batch. The thickness of the plaster layer should be selected equal to the size of the filler. The working tool is kept at an angle of 60 ° in relation to the facade of the house.

30 minutes after applying a plaster layer on the wall, it creates a pattern with a soft grater of different types: in the form of horizontal, vertical, cross, spiral or chaotic strips. It is formed subsequently rolling solid granules behind the grater.

Horizontal pattern

Vertical pattern

Various appliances for applying plaster

Painting plaster

After plastering all the walls of the house, the surface is given to dry carefully. This may require different times, depending on the selected type and brand of plastering. Read the manufacturer's recommendations on this matter, because it is not recommended to break them. Otherwise, the facade will lose its durability, it can stratify or crack.

After the final drying of the facing, it is possible to carry out its staining. For this, paint and special tools are used.

Choose a high-quality mixture and paint of one manufacturer

The roller is crossed by the main surface, and the brush - the grooves that remained after rolling the granules under the influence of the grater. The house looks unusually, the facade of which is colored by two colors: the main surface is light, and the grooves are a dark tint.

Staining facade

Care and operation

Decorative plastering mix Coroede for external finishing of houses demonstrates high practicality, a long time retains the original beauty, color brightness. Depending on the selected type of such material, the house trim can serve to a quarter of a century without repair work.

The decorative facade of this type has antistatic properties. In other words, he does not accumulate dust. We add that he is self-cleaning during the rain, but if necessary it is quite realistic to wash in conventional water. Pollution is easy to remove from the surface of the cored.

Manufacturers and cost

Plastering mixes of the coroede today make many companies. The price category of such a finish for facades of private houses is low and varies in a wide range. The cost of a specific composition depends on its operational characteristics and brand.

The most common brands whose products should pay attention due to its high quality, are as follows:

• Ceresit;
• Kreisel;
• Baumit Begrauf;
• KNAUF.

Kreisel.

KNAF

Ceresit.

Below in the form of a table shows an example of the cost of the cores of the most popular Ceresit brand.

Note that the larger the inclusion in the solution, the more significant the consumption of the material will be. This generally affects the final cost of facade works.

Video

In the video video, it is shown in detail how to independently apply the boiled plaster.

Photo with options for finishing facades plaster cored

The collection contains photos on which it is shown how the facades of private house, trimmed using the coast plaster look like.