What are the facade panels for outdoor finishing at home: species and manufacturers. What are the panels for finishing the facade of a private house, their types and recommendations

The decoration of walls outside is the final stage in the construction of a new home or reconstruction of the existing one. It is necessary to protect the outer surface of the building from the influence of weather factors (temperature, precipitation, wind), reducing heat loss, sound insulation. In addition, the facing allows you to give the house outside the desired view. Excellent performance and aesthetically attractive surface provide panels for outdoor finishing at home. They are distinguished by a wide variety of colors, sizes, forms. The coating mimics such natural materials like a stone, wood, brick. Wall panels Different with the following advantages:

• a long service life;
• prevent heat loss;
• are a reliable obstacle for noise from the yard and from the roadway;
• not afraid of high humidity;
• safe for the environment;
• have a beautiful surface.

Thanks to the simplicity of cladding panels, installation takes at a minimum of time. At the same time, the finished design has a significantly less weight than a stone or brick, so does not require a reinforced foundation. Industry offered panels from different materials: Wooden, plastic, ceramic, composite and others. Select option for external sheaving The walls depend primarily on the host preferences of the house. It is also necessary to take into account the condition of the walls, climatic features, features of operation.

Practical plastic finish

Using plastic panels for cladding, get a solid, waterproof design. It resistant tolerates the sharp change of temperature, the effects of ultraviolet, wind and humidity. The material is distinguished by durability, does not lose properties throughout the entire life.

Plastic panels create a rigid coating, unpretentious and durable. Their facial part can be performed in the form wooden trimMimic a stone or brick. Externally, it is almost indistinguishable from natural materials, creating the impression of goodness, accuracy, reliability.

Plastic panels with fiberglass are often used for wall decorations. These types of plastic are distinguished: Fibrover (opaque colored sheets), fibrolat (transparent material), fibroton (tinted plates). The area of \u200b\u200bone element can be 1-3 square meters. The surface of the material is performed as brick masonry, Tree, often she imitates a stone. His advantages:

• durability, reliability;
• durability (lasts more than 50 years);
• resistance to high and low temperatures;
• in the sun does not fade;
• moisture does not absorb.

The material is not corrosion, has a small weight. For installation, screws are used, construction glue. To cut the sheets under the desired size, use a saw or jigsaw. The edges do not require additional processing. The minuses include high cost, low thermal insulation. The last deficiency is easily eliminated by the device for additional insulation of the walls. To avoid cracking of sheets under the action of temperatures, there is a small gap between them.

The popularity of wood is explained by its environmental cleanliness, natural beauty, accessibility. Installation of a wooden facade is quite simple. For this, the lining is often used. However, its fastening takes quite a long time, each item must be installed, secure. It is often necessary to customize on the place, and this slows down the process of the trim. Improve efficiency allows the use of facade panels or plaquene. It is a profiled plaque of a simple cross section with rounded ends. From the lining and ordinary boards it is distinguished by a large width.

The advantage of the wooden facade of Planken is the lack of fasteners outside. The coating is a smooth, beautiful surface. Combining it with other materials (brick, stone), create an original facade. For the manufacture use different species of trees. Larch panels are distinguished by durability, external beauty, high density. The material is steady of weather changes, does not rot. Its unique texture provides an extraordinary beauty of the outer surface.

For the installation of a wooden facade, a device mustache. It is made of rails and attached to the surface of the walls. The space formed by the framework allows air to circulate, providing evaporation excess moisture and natural veneer ventilation. The installation of the wooden facade is performed using special fasteners. Between the individual elements, it is necessarily a gap, which will allow the coating during swelling of individual planks not to lose the integrity. Increase the durability of the facade allows additional processing with protective facilities (varnish, paint). Periodically, the coating must be updated.

Consumers are popular for external finishing of houses made from cement with the addition of silicates and various fibers. Cement ensures the strength of the material, resistance to humidity. Fillers give the mixture plasticity, reduce exposure to deformities. Facial surface perfectly imitates stone, brick, plaster. Therefore, they are often used to stylish buildings under medieval castle or tower, while restoration of facilities with historical value. Outside, they are covered with a polymer film that reliably protects against pollution. The advantages of the material:

• will last for many years without losing its qualities;
• environmental friendliness;
• convenience and simplicity of installation;
• high thermal insulation properties;
• creates a barrier for extraneous sounds.

Wall panels from fibrcement are not burning, the dyes used in them are resistant to ultraviolet. Manufacturers constantly improve their manufacturing technology, reducing the weight of individual elements. The disadvantages include the absorption of moisture with the surface, as a result of which the coating may be deformed. The material does not differ in high strength to mechanical shocks.

Installation of cladding from fibro-cement panels is performed using a frame of metal or wooden profiles. Self-tapping screws are used for fastening. Self-tapping caps are covered in a tone of paint. For insulation of walls, they are additionally organized by a layer of thermal insulation.

Facing ceramics

The basis of the ceramic panel is clay with the addition of sand and natural components. The mixture is subjected to burning, pressing. The material obtained looks elegant, has excellent characteristics, resistant to moisture. Without adding dyes, terracotta panels are made. They are subject to long-term burning, ensuring high strength, durability, beauty.

The pressing method with subsequent firing is made by clinker panels. They perfectly cope with mechanical loads, steadily confront the action of aggressive substances. They are distinguished by affordable price and high quality.

Wall panels made of composite materials are distinguished by increased thermal insulating properties. Their basis is foamed polyurethane foam. Outside, it is covered by a layer of ceramics creating protective covering. Combining ceramics and stone, get facade with improved operational and unique decorative properties. For example, stone is used for cladding the base, and ceramics is the rest of the walls.

Disadvantages of ceramics are the fragility and fragility that are most manifested at the installation phase. The use of protective means for coating the facade makes it possible to exclude their damage.

The basis for the installation of ceramic plates is a frame that is mounted outside the bearing wall. Given the slight weight of the plates, the load on the carrier construct will not increase. Manufacturers offer ready-made systems of facades that will cost more, but will provide the speed and quality of work. Ceramic panels are considered practical and convenient to operate material. The facade made of them looks respectable, reliably. He will last for many years without requiring special care.

After the insulation of the house behind, it is necessary to take care of the facade finish. Today there should be no problems with this problems, because manufacturers every year release new finish options or improve the old ones. For a house made of a particular material, its option is provided.

The outer decoration of the house of wood allows you to simultaneously solve several problems: to give the house aesthetic appearance and create reliable protection against the harmful effects of surrounding factors. In most cases, finishing activities make it possible to improve the thermal insulation characteristics of wooden walls, and this saves on the heating board. Today, the assortment is diverse in the construction store, so before buying a specific material you need to get acquainted with its main properties.

Siding

This option is finishes wooden house It is considered the most popular. The bottom line is that there are strips with a castle compound of spike-groove. The range of siding is quite wide, but the most popular option is the option of metalplastic and ecological wood. Also in stores you can meet fibro-cement materials.

On video lining by siding houses from a bar:

The benefits of siding should include:

• available cost;
• under the trim, you can lay the heat insulator;
• siding allows you to protect wood from the influence of moisture;
• installation can be carried out;
• attractive appearance.

But there is siding from siding back:

1. Working with fibrocement must be extremely neat, as it is very fragile. If it happens, it will break. In addition, such material is quite expensive.
2. Installation process involves the arrangement of the frame. This measure is forced, because only so the coating will acquire a long service life;
3. If the material is correctly installed, then in winter there will be some difficulties.

Imitation Bruus

Aged the tree begins at a certain period of exploitation of the house. Thus, you have to take a number of measures to improve the external state of the dwelling. For this, it is provided for wood or PVC material.

This method of finishing perfectly imitates the structure of the bar. Many manufacturers today offer their customers imitation of oak, cedar. As for the advantages and cons of wood imitation, they are similar to Siding.

On video facing by imitation of a tree of a tree house:

Block house

The main feature of this material is the possibility of transformation of a brusade building in a log. The appearance and structure of the material make it possible to not distinguish it from pinned raw materials. There are cheaper options from metal and PVC.

The advantages of such a system should include:

• aesthetic appearance;
• ease of installation;
• the possibility of imitation of a natural tree at an affordable price.

There are in block houses of minuses that are identical to the disadvantages of previous materials.

On video lining house Block House:

Finishing houses from panels

Thanks to the sip panels, it is possible to build a house for a short time interval. This version of construction appeared not so long ago, but already received a high demand for both private and professional developers. The main dignity can be considered the possibility of building a home personally. As for the finishing of the received buildings, there is a wide selection of materials.

Block house

This finish option involves the use of oak, linden or ash. But to make the finish, it is necessary to make wood finishes with special compositions. Thanks to them, it is possible to create reliable protection against negative environmental factors.

Siding

This is another sought-after way of finishing the house of the panels. There is a wide selection of shades and colors. With the help of siding, it is possible to give the house not just an attractive look, but also to increase the thermal insulation of the house.

Facade panels

For the manufacture of such panels can be used plastic, stone, metal M metal. Due to such a wide selection of materials, it is possible to create a finish that will mimic wood, natural stone or brick.

On video cladding with facade panels of the house of panels:

Painting Walls

This option is the most inexpensive and simple. Despite the fact that the finish is performed quickly and easily, it gives the house aesthetic appearance. But there is one drawback here. To paint the house, it is necessary that its surface is perfectly smooth. It is also worth paying attention to the choice of paint composition. She today is presented in a wide variety. It is worth choosing, given the surface to be exposed to staining: plastic, wood or metal.

Clinker tile

This type of finish for the house of the panels is considered the most popular. Its properties and characteristics are not better suited for such a construction. For the manufacture of clinker tiles, white clay use. It is perfectly opposed with frost and moisture, and still fluctuations in temperature indicators.

On video finishing with clinks tiles:

Decoration of a brick and stone house

If you need to see a brick or stone house, then most often use decorative plaster. Due to her, it is possible to get a relief or smooth surface. Another advantage of such a finish can be considered increased resistance to fires and sound insulation.

Another option to finish a brick house will be a stone. This material is distinguished by reliability and durability, so the service life is quite long. You can use for this natural and artificial stone.

The following sought-after material are thermopanels. The facade finished with their help acquires excellent density and thermal insulation. The material has a light weight, so it is possible to apply it for any foundation. And despite this, thermopanels have high strength and excellent performance.

On the video decoration of a brick house:

Well, the most popular is siding. This method of cladding will allow you to hide all the flashes of the facade. If there are cracks on the walls of the house, then with siding, you can hide them from prying eyes.

Select the material for the external finish of the house is easy if you know the features and characteristics of each of the available. When choosing, it is necessary to take into account the conditions of operation of the finish, the surface to which it will be applied, as well as its personal wishes. And yet, any of the presented finishing options has a rather attractive look, if all the work on its installation was performed correctly.

The tree is one of the few natural materials used today in construction and finishing. Along with the positive qualities inherent in him, wood has such characteristics that do not allow it to consider it best Material From the point of view of durability and resistance to external influences.
However, the house facing by wooden panels is still very popular, as well as the construction of wooden residential buildings.

Literally a couple of decades ago, the wooden was the most affordable and inexpensive option. With the advent of modern artificial materialsThe best operating properties and less costs have slightly lost their popularity.

Advantages and disadvantages of wooden sheat

The main advantage of such a finish is still its naturalness and environmental friendliness, which for some developers is the main selection criterion. But, since the facades material practically does not affect health and well-being, many prefer these qualities for durability, external factors resistance, non-visibility for the care, which is not enough wood.
The main claims to this material:

• High compared to many other types of finishing Price. Especially for high-quality and treated wood;
• Instability to biological effects - reproduction of mold, fungi, insect damage;
• Sensitivity to the effects of moisture, sun rays, temperature differences, accelerating rotting and destruction of wooden finishes;
• The need for annual protective and repair activities.

In a word, the panels of the same material today can not be considered an ideal solution, because the facades can be separated cheaper, and at the same time they will serve longer, without requiring additional financial and labor injections.

Types of wooden panels

Modern manufacturers have tried to consider and level all the shortcomings of natural wood in the production of facing panels. Thanks to the introduction of new technologies, the market has been replenished with materials demonstrating improved characteristics.
These include:

• OSP panels (oriented chipboard) mimics lining or log. It is made of wood fibers compressable with resin.
  They differ from the massif of greater resistance to moisture and ultraviolet, but still requires the careful care and protection of the face surface using staining, varnishing or impregnation with special compositions.

• The panels are made of array, impregnated with antiseptic and anti-view compositions. The impregnation and processing of wood is made according to a special technology that allows these compositions to penetrate deep into its structure and provide high-quality protection against rotting and fire.

For reference. No impregnations applied to the wooden surface with their own hands, do not provide the degree of protection that manufacturers of finished panels guarantee.

• DPK - panels of wood-polymer composite materials manufactured by extrusion method. Their operational properties are very high - such panels are not afraid of moisture, no frosts or other aggressive impacts.

For reference. From the DPK make even roofing materials and terraced board used as outdoor coating In not heated and open areas.

There are other wood-based. For example, OSP and CSP. They are made in the form of large plates, which speeds up their installation, but require additional decorative finishes - painting or plaster - due to an unsightly appearance.

Montaja technology

Regardless of whether you are using a panel of natural or artificial raw materials, the method of their installation is the same - using self-tapping screws or nails to a pre-mounted frame. We give here a general list of works.
More detailed instructions On the installation of each specific type of panels, there are in the relevant articles, it should also be attached to the manufacturer to the products produced by them.
So:

• Preparation of the facade without its alignment - sealing defects, joints, sweeping from mold, filling of interventic seams, etc.;
• Installation on the wall of the windproof film, if no additional insulation is planned;
• Mounting frame made of metal profiles or wooden rises of a suitable cross section perpendicular to the direction of fastening of panels. The step between the frames of the frame is determined by the type, weight and dimensions of the facing, and they themselves are installed strictly in the level so that all their front faces lay in one vertical plane;
• Next Stage - Laying and Fastening heat insulating material Between the frameworks of the frame - is performed if necessary, insulate the structure. In this case, the windproof film is mounted on top of the insulation and is fixed on the slave rails:

Note! The thickness of the insulation should be less than the thickness of the frames so that the ventilation gap is formed between it and the facing. The air layer will prevent moisture accumulation under the panels, ensuring their long service.

• Now you can mount the panels for lining a wooden house to a frame. Method of installation depending on their type can be hidden or open.
  Most often, the decorative panels have a profile with a combination-groove combination system that allows you to hide the attachment points under the bottom of the upper board.

If you are using non-profiled panels, to prevent the formation of slots between them and penetrate the lining of dust and moisture, the installation is recommended to produce a mustache, as in the following picture.

Read more Intelligence wooden panels You will help the video accompanying this article.

How to make a wooden brick house

Wooden walls of houses Even if proper care and repair, over time, lose their attractiveness, thermal insulation and protective properties, so require. And sometimes the owners simply want to "change the image", hiding the log house under the brick.
Unfortunately, this is not always possible - very expensive and requires a thorough preparation of the foundation and reconstruction of the roof. An excellent alternative can be the facing of a wooden house with thermopanels.

Thermopanels with clinker tiles

This composite material with the front surface of the clinker tile under the brick, the base of which is a polymer insulation. Thanks to this combination, the panel is simultaneously performed by thermal insulating, and decorative functions.
They produce them in the method of matrix molding: the facial side is placed in the form, which is then filled with a liquid insulation. Thoroughly, it firmly gluits with tiles and forms a monolithic product.
In the process of production, the fastening elements for mounting panels on the wall are also installed.
Polyfoam or polyurethane foam as a heating base have low thermal conductivity, resistance to moisture and other positive operational characteristics. And the clinker tiles in addition to the magnificent appearance is characterized by high strength, low water absorption, resistance to burnout.

The panels made on this technology make it possible to avoid wet works on the brick laying or leveling the base and sticking the conventional tile. Installation is made in a dry way, which is much simpler, cheaper and faster.

Installation of thermopanels

Facing a wooden house Thermopannel is similar to mounting wooden panels. But additional insulation is excluded from the process.
Wooden frame racks are installed at such a distance from each other so that each panel relies on them in three places - along the edges and in the middle.
Installation itself is carried out in the following sequence:

• First, at the bottom horizontal mark, the base profile is fastened, which serves as a support for the first row;
• Then the angular panel is installed or, if so is not, is cut off at an angle of 45 degrees two ordinary panels and form an angle of them;

• The first horizontal range of thermopanels is assembled from the angle, fixing them to a frame at least six self-tapping screws, which are screwed into the seams between the tiles;

Note! Different manufacturers can have their own installation requirements. Some recommend to miss the joints with silicone sealant or fill in special cavities by mounting foam, others allow the installation without using these materials.

• In the same way, the entire building is built upwards, forming angles in window and doorways;
• After the installation is completed, the seams between the tiles are filled with a special mixture. It will hide the places of fasteners, protect the insulation base from atmospheric influences and give cladding a natural look of brickwork.

Installation can be carried out at any air temperature. If this happens in winter, the decoration of the seams is better to postpone until spring or use a frost-resistant grout mixture for this.

Conclusion

Facing of wooden houses panels is an opportunity to give even an old and non-pre-payment of a solid look. The choice of the type of panels is a matter of taste and opportunities, but in any case it is necessary to leave between the walls and decorative coating air gap.
Air flows in this space will not give a tree to accumulate moisture, falling under the lining from the outside or the resulting condensate. And this is the main condition for preserving the structure of the tree and ensure the durability of your home.

In order to give a residential building, high resistance to the effects of negative factors, durability and maximum attractiveness, apply external decorative finish Its facade with decorative panels. Let's talk further about what the panels are used to finish the facades of private houses most often.

Technology I. current materials For the exterior decoration of a residential building, it is necessary to think through the stage of its design. From the chosen design of the facade, the building property depends successfully to fit into the surrounding landscape, as well as the important operational parameters of its walls as durability, practicality, heat heating and sound insulation qualities.

Modern manufacturers offer a huge selection finishing materials For external work. But it is especially allocated among this diversity of the panel for finishing the facade of private houses, made from different materials and demonstrating different operational parameters. Let's talk about the most popular of them.

Plastic

Especially popular at present facades of residential cottages, trimmed plastic panels In the form of large elements. Such decorative panels are made of polyvinyl chloride, which adds special components. Supplements contribute to an increase in the resistance of the facade to mechanical effects and weather phenomena.

The main advantages of PVC are such properties:

• low weight provides material lightness, so it can be applied as a finish for walls of any type. With this finish, you can return an attraction even the walls of the old structure. Low weight also provides comfort when transporting material;
• long operational period;
• easy installation and disassembly;
• unpretentious care after installation. Such a facade decorated with plastic panels is indeed very practical, easy to clean. ordinary waterdoes not fade under the influence of sunlight, does not swell from dampness, moisture;
• wide color palette, diverse design (there are plates with imitation appearance natural stone, laying from boards and so on);
• available cost.

We are in demand and thermoplastic facade plates, which are based on polyester fiberglass. The facade finish with thermoplastic panels under the stone looks incredibly modern.

Clay

Recently, clay facade plates become increasingly popular. The photo below shows the house, the facade of which is divided in this way. Increasingly, people try to separate their private home by such material, since this is an affordable way to make a presence building attractive and expensive, original aesthetics, to make it more comfortable, and also provide reliable protection from external negative factors to the walls of housing.

According to the main properties, such facades are similar to facades from artificial stone or bricks. They are practical, frost-resistant. Such a cladding provides the facade of houses an excellent protection against external influence, not losing its aesthetics over the years. Panels do not fade into the sun, do not deform from high humidity, serve without loss of initial properties a very long time.

Clinker

Clinker base panels are not a novelty of the domestic building market, however, their popularity over the years does not fuss. Based on them applied ceramic tilewhich has proven to be reliable material with high performance parameters. Also in the composition of clinker plates there are polyurethane foam used in order to increase thermal insulation quality facade.

The features of such structures for facades is high strength, long service life, a wide range of color palette, a variety of textures. All this acts as a guarantee to reliably protect the external walls of the private house from negative environmental factors.

The trim of the facade with clinker panels can be performed with your own hands. In addition to high aesthetic qualities, facade clinker plates, buyers note the high heat shield properties of such a finish. Cottage, decorated with such plates, will acquire a comfortable, warm atmosphere.

With your own hands, finishing the facades of private houses with facade clinker panels are performed quite quickly, without additional difficulties. For this there is no need to have special equipment, fixtures. Locking the plates on the wall is carried out by means of nails, screws, brackets, adhesive compositions, Dowels.

Fiber cement

Fiber cement plates are often used to finish the facades of the residential house, which mimic the appearance of various materials. For example, you can bind the house with a fibro-cement tile under the brick.

The advantages of such elements include the following properties:

• high frost resistance, fire safety;
• durability;
• resistance to the appearance of rot, corrosive processes;
• canceled heat and sound insulation parameters;
• practicality - the surface of the fibro-cement panel is capable of self-cleaning under the influence of precipitation, as it is covered with an inorganic film.

The disadvantage of fibro-cement panels call the need for finishing staining after installation, high tendency to water absorption, low stroke resistance.

Metal

Metal panels facade are so popular, as they have a number of advantages. Consider brief description Positive and negative sides of such a finish.

Disadvantages of such a clash of this kind are also present, but they are less significant than dignity.

It should be noted that nowadays on the domestic construction market of a metal panel for the completion of private houses are represented by profiles of various kinds, which allows you to solve a number of designer tasks. Namely they meet:

• with a corrugated surface;
• with a smooth surface;
• perforated;
• with additional decorative ribs.

Sip Panel

The finish of the facades of the house from the panels is often performed with their own hands in order to make them as warm as much as possible, because the sip stove is recognized as one of the most warm materials For the rapid construction of buildings and structures of various purposes. The facade of the sip panels is 6 times warmer than brick facing. In addition, it perfectly tolerates a sharp change of temperature regime, not crackging and not losing the initial characteristics. Thanks to this quality, the housing acquires the maximum comfort and a healthy atmosphere at any time of the year.

The panel sip is very durable and racks to the effects of mechanical nature, therefore their service life is impressive. They are not covered with mold, fungal formations and are not corrosion even in wet weather.

Sandwich panels

Sandwich panel has a specific design: the stove consists of two upper high density layers, and the layer of insulating material is placed between them. This facade is actively used today to finish new buildings and reconstructing old residential buildings.

The sandwich panel is very beautiful in appearance, have excellent heat-grinding properties. They are diverse in size, easy by weight, moisture resistant, fireproof, durable. Such plates demonstrate high strength, frost resistance, reliability.

This is really reliable material, although it can have problems with him. It pleases that if one panel is damaged, it is realistic to replace the new slab without dismantling all the cladding. The cost of such a cladding is quite high, but the cost of repairing the facade can be reduced, competently combining materials.

Polyurethane

Panels from foamed polyurethane for lining walls of private houses are widely used in our day. They are made of high-soft plastic with a cellular structure, into which a marble crumb is added, spilled in a polymer under the action of high temperatures.

Such a facing material serves until half a century, has cavities with air for 97% of its mass, which makes it very easy and allows you to warm and soundly insulated a house. It also allows you to organize the excellent ventilation of the walls and their protection against pollution, pests.

Installation of the polyurethane facade is carried out taking into account its tendency to change in size with a significant temperature difference. But after finishing the external walls of the house by polyurethane panels, it will certainly acquire an elegant, respectable appearance.

Wooden

The main advantage of facades of residential buildings from wooden panels is their extraordinary view. The tree looks very natural and natural, so houses with such a finish fit perfectly into the surrounding landscape and the greens of nature. In addition, wooden facades provide dwellings reliable heat and sound insulation.

However, over time, wooden plates are fused under the influence of the Sun, so they must have a reliable protective coating. In addition, they demonstrate low resistance to increased level humidity. For latitudes with frequent precipitates, this option is not suitable, since the wooden plates can swallow under their effect.

Composite

As practice shows, composite panels are becoming increasingly popular. With their help, you can implement a variety of design ideas, as the color solutions and the textures of such a cladding for residential buildings today are very diverse.

The types of similar facades are diverse: from galvanized metal, aluminum, granite, fibrocement, and so on. The composite facade is resistant to corrosive processes. low indicators The addiction to the bundle is durable, practical in care. At the same time, the cost of such facades is quite on the pocket of many of our compatriots.

What to choose what is better

The facade cladding should serve for a long time, so the selection of this material needs to be approacon. There are a number of requirements for the facing of the external walls of residential buildings, which must be performed:

• hygiene, environmental purity, the absence of harmful components, substances radiating radiation;
• resistance to negative impact fungal microorganisms, mold, corrosion, insects, ultraviolet radiation, rotting processes, fire;
• mechanical strength (shocks, scratches) so that the building to maintain external aesthetics for a long time to maintain it sound insulating and qualities at the proper level;
• durability - residential building is not built for a couple of years, so its facade must have a long service life;
• simple installation with your own hands;
• practicality and easy care.

If the facade of a residential building complies with these requirements, it is worth preferred to other options. However, it is worth considering the thickness of the walls of the house, as well as its age when choosing a specific option. The thickness of the wall, the more severe cladding they will withstand. Heavy panels: fibro cement, metal and so on. For old thin walls, light weight options are suitable for the weight: plastic, polyurethane, wooden plates.

Video

On the video you can see options decorative panels For outdoor decoration of buildings.

Photo options for outdoor finishing of private houses

A selection of photos will help to decide on the selection of suitable panels for finishing a private house.