Brick panels for interior decoration - fashionable repair trends. Facade panels under the brick.

To give a cozy and stylish mind to their housing, homeowners apply various materials. The choice is extremely wide and diverse. The greatest fame in the construction market was conquered by finishing products from natural components: stone, wood, bricks.

It is connected with their security for human health and the environment. In addition, the apartment, decorated using such materials, looks very cozy and has a kind of charm.

Unfortunately, the use of natural materials designed to finish the walls of the apartment is not always possible. Associated, it is not only a fairly high cost similar products, but also some technical features.

For example, by planning a brick partition, consider that it will have a solid weight. However, to separate the apartment in the desired style will help plastic panels with the desired pattern. Among them and in demand by designers and their customers are decorative panels under the brick.

Technologies used by creating them allow you to make a copy, visually practically indistinguishable from the brick.

Brick imitating panels are found in building and finishing materials in several types:

• Sheetworks. They are used to finish the walls and partitions. To the positive results of using such panels, you can attribute the smallest number of joints. During such a finish, the house will be exposed to external environment (Atmospheric precipitation, high and low temperatures). As a rule, the thickness of such panels rarely exceeds 3-6 millimeters, and the length varies from 120 to 240 centimeters.
• Tile under the brick, occurs in various sizes. The plane of its use is to highlight the wall area or implement the designer's idea in the form of a pattern or abstraction.
• To cover the ground floor and visible part of the foundation, manufacturers offer decorative panels under a brick in the form of long weighing boards. The dimensions that are in length can reach 50 centimeters, and in width rarely exceed 3 centimeters.

For the manufacture of such decorative products, various materials are used:

• Products created from pressed wood chips, better known as decorative wall panels MDF. The required strength of such panels is achieved during the manufacturing process when under the influence high temperatures Wood highlights ligin, an increased viscosity substance.

• PVC panels. A number of special softener is added to the products from polyvinyl chloride. Finishing materials from PVC have excellent strength and moisture resistance. Their advantages also include resistance to harsh temperature change, long term use. Such wall panels are used for both internal and external finishing works.

Application of panels under the brick in the inner interior of the apartment

Brick imitation for interior decoration is widely used by designers in a wide variety. However, there is also a common for all types of panels used for interior wall decoration.

PVC panels

Almost always specialists in finishing work recommend paying attention to the PVC panel. Conducted, this is the fact that PVC products are distinguished by an extensive range of colors and paints. For example, plastic tile under the brick can imitate brick of different types. In addition, PVC products do not think about additional protection in the form of paint and varnishes. For their cleaning, standard detergents encountered in the arsenal of each mistress are applied. Thus, PVC materials are ideal for finishing sanitary facilities, bathroom, corridors, kitchens.

To finish the working area of \u200b\u200bthe walls of the kitchen, the panels are suitable, imitating white brick.

Imitation of bricks for interior decoration, can be installed in any direction, while fixing them to the wall can be used:

• Wooden crate. This method of fastening is used if the surface of the walls have noticeable errors. In order to secure the panels, you need the screws, the screwdriver and the profile doom itself.
• Adhesive mixture. When using glue, it is assumed that the walls have a perfectly smooth surface. If the wall surfaces have significant defects, they will need to be corrected using putty works or plaster. Otherwise, fasteners will be low-quality and short-term. When buying glue, pay attention to its components, it affects the method and place of use. For fasteners, a mixture of various thicknesses is used, and it should not exceed it, it will affect the quality of fixation.

The outer part of the PVC panels can visually copy the brickwork, this is due to the fact that it is a special press form for its production.

In the process of creating such a product, paints of increased resistance are applied to its surface, or a special film is pasted, creating a volume effect. Plates made using the last method were called "laminated".

Panels under the MDF brick

These products are manufactured by presshing wood chips and sawdust with a dry method at high pressure. The modified special resins containing a small percentage of formaldehyde perform as a binding component. It is understood that the composition of the panels during operation will not harm human health.

MDF panels are widely used to finish balconies, arbors, veranda and other similar objects. However, the special qualities of these finishing materials allow them to be applied for internal finishing works. For example, moisture resistance allows using the MDF panels for a bathroom or kitchen. However, using facing plates imitating bricks, think about their protection to design corridors in public buildings or hallways. The anti-vandal coating is applied to the facing part of the panels only in exceptional cases.

Tile under the brick is remarkably suitable for office space and residential rooms. Special advantage is their possible combination with other materials. For their installation, the frame method is mainly used. In this, the case of installing panels will not take much time, and the presence of construction waste will be minimal. The advantages of this type of decorative materials include:

• Reliability and sufficient strength, which facilitates the installation of panels to the crate.
• The tile under the brick, made of MDF, allows you to hang the shelves and nonsense lockers on it.
• The MDF panels do not harm the environment.
• Does not affect human health.
• Affordable price.

Types of panels imitating brick

Manufacturers of panels offer their customers products from materials such as plywood, drywall, fiberboard, fiberglass, organitis, HDF. Each of them has certain advantages and shortcomings. Some of these decorative plates are unstable to the effects of temperature or moisture, other unnecessarily fragile. As a result, not all wall surfaces can be issued with their help. Therefore, according to the degree of propagation, they are inferior to products from MDF or PVC.

Finish under the "brick". Styles

The most common decoration under the brick in the design of some premises of the classic style, as well as rural buildings. These styles include: Romanesque, English, Gothic, Country and others.

Expansion of the finishing materials market led to the fact that making the house or room in a certain style, optionally leave the walls without additional processing. Not so long ago, on the shelves of the store it was possible to meet only a wallpaper with a painter of bricks. Naturally, no realism is not about and did not go. Tile under the brick, which is sold today, externally does not differ from natural brickwork.

Professional designers when making walls of residential buildings or apartments adhere to several rules:

• Separate all wall surfaces with panels under the brick, it is necessary if there are several recreation rooms in the house. The interior of the room, made in this style, will remind the old knightly castle or medieval restaurant. However, a modern urban resident, being in such a room, will constantly feel emotional discomfort.

• Placing the panels of only one wall or partition, you do not overload the interior and create a certain psychological setting. The tile under the brick, imitating white brick, or light tones is suitable for the walls of the apartment - studio or one-bedroom.
• In bright colors, you can only be issued a wall of the wall to attract attention to it. However, you should not use plastic barbecue or fireplace panels, the heat from the living fire deforms the product.
• The tile under the brick will be appropriate to look at the bar or nightclub, but it is better not to use it for residential rooms. In apartments and homes try to create a calm and cozy atmosphere.
• Plastic panels of white and other light shades during the design of the walls do not carry a negative emotional load on the indoors. They are suitable for rooms decorated in pastel colors, but will bring some rigor.

There are many ways and options to place a room using facing plates that imitate brickwork.

When planning to change or issue the interior of the room, repel from your financial opportunities, the area of \u200b\u200bthe room, and most importantly from their desires. The design of the apartment in the "brick" style holds in fashion for a long time, and create a special interior, in the apartment using wall plates under the "brick" quite simple.

Brick has become a popular decor element, thanks to the variety of its shades and textures.

However, the cost of this finishing material is too high, and when working with it requires certain skills and skills.

The wall panel under the brick for interior decoration is an excellent analog substitute for natural material.

Benefits of wall plates

These panel plates are made of fine chips or polyvinyl chloride.

Due to this, their cost is at times less prices on natural materials. But there are other advantages of such a finish:

• Easy installation that can be performed independently;
• The number of draft work is minimal;
• The possibility of closing large wall sites;
• Complete identity of brickwork;
• The possibility of using almost any room;
• Easy care.

The construction market can offer several types of plates, most popular of which are:

With the imitation of brickwork, made from fine-defective compressed shavings. A binding substanceAllocated when pressing is Lingin.

This finish has high sound insulation and can be impregnated with refractory substance.

Polyvinyl chloride or PVC option With imitation of brickwork cheaper than MDF, but no less high-quality.

This material goes to have a whole sheet species, either manufactured as a tile or an elongated rail.

Fiberboard, plywood, organic, gypsum, HDF plates, as well as panels of fiberglass, imitating brickwork are less popular.

Any of these finishing materials has certain limitations in their use.

If some models are not enough moisture resistant or unnaturally imitate the brick texture, then others are too expensive or very fragile, and there are also such - too heavy for the production of mounting.
Therefore, preference gives PVC or MDF slabs.

PVC

Polyvinyl chloride plates are suitable for finishing work in residential and public houses, as well as utility facilities.


Because of their moisture resistance, such a finish is possible in the bathrooms, in kitchens and loggias. PVC wall panel under brickwork for interior finishing works:

• It has the natural textured imitation of the stone;
• Has a wide range of unusual colors combined between themselves;
• Inexpensive worth;
• It has long term services and care for her just;
• Calm to the effects of ultraviolet;
• Does not suffer from temperature differences;
• Flexible, elastic and easy;
• A reflected, but deformable under the influence of high temperatures;
• Burial masonry imitation is created due to a special mold.

In the production of plates on their surface, waterproof stained formulations or adhesive film are applied with volumetric pattern, i.e., the lamination of the material is produced. PVC plates make one or two-layer.

It is performed using glue on the walls.

Thanks to the flexibility of the slabs, small irregularities of the walls are allowed, which can be finished with the effect of naturalness.

With significant wall defects, the installation of panels are made according to frame technology.

Then you will have to pre-trim the frame of plywood due to the weak impact resistance of this finishing material.

MDF.

Thanks to the ecology of MDF Boards, this material is recommended for interior decorations.

But the MDF panels are popular and when performing facing works of facades of private houses, arbors and balconies.

Due to increased resistance to moisture decorative finish It is used in the bathrooms and in the kitchen. But panel data are subject to mechanical damage.

Installation of panels is carried out in the main framework. All installation work is made quickly and very carefully.

The advantages of the material are the strength, the possibility of placing shelves and cabinets on it, hygiene and price.

Use in the interior

This material is widely used in the design of residential rooms.

Designers prefer panels of a rough texture, imitating chip and scuffs, which is characteristic of Loft style.

The wall panel under the brick for interior decoration of the kitchen is selected with the lacquer surface, decorating only one of its wall or apron.

By installing the slab data by the frame method, you can hide the electrical pipeline or other engineering communications.

Saving walls with this decorative material, a variety of design elements are created in the form of podiums, niches and columns. Placement of panels on the ceiling surface looks unusual.

Facing options for creating an exclusive interior set. Brick masonry suitable when placing rooms in the style of country, Gothic, English or Romanesque styles.

Full room decoration brick masonry Suitable for a house with several rooms for relaxation.

This is due to emotional pressure, which produces a similar interior, which gives perception of finding a castle or Harchevne.

But the facing of only one wall or the creation with the help of these panels partition will remove the load and will fit even into one-room apartment.

For a small wall plot, you can use bright color, which will allow to focus on a certain zone.

It is impossible to be facing the fireplace by this material due to its exposure of deformation.

Red color will fit into the interior of a restaurant or club. In the apartment or house its use is not recommended due to negative influence on an emotional environment.

For residential premises, white and light gray colors are suitable, which will be combined with pastel interior tones.

One of the most trend directions in the world of interior design is the Loft. A distinctive feature of this style is the symbiosis of old and new items, such as trendy chandeliers and vintage tables, modern parquet and vintage windows. Brick walls are considered an essential attribute of the loft. Reaching the effect of aged wall will help finish under the brick.

• veneers
• gypsum,
• decorative plaster,
• clinker tile
• wallpaper,
• construction panels under the brick.

The main advantage of all these materials is a small weight, thanks to which the reedy wall does not create an additional load on the foundation. In addition, such a finish has a small volume, which allows you to maintain the useful space of the room.

Viniron

Viniron are separate planks stylized under brick spoons. This type of interior decoration is very similar to the usual tile. Unlike tile, which is made exclusively from clay, veneers can be made of glass, leather, wood or plastic.

Due to the high cost of veneers, it is rarely used to decorate the entire wall. Most often, with this decoration, the premises will produce zoning or focus on certain art objects. The veneers are attached along the same technique as the tile, so their installation does not require any special tools.

The advantages of veneers:

• high aesthetics,
• the possibility of replacing a separate veneer without disturbing the integrity of the whole masonry,
• wide color palette
• a variety of textures.

Disadvantage: High price.

Gypsum

Due to their hypotability, the gypsum is widely used to create various decorative elements, such as bas-reliefs, stucco or bricks. There are two techniques for creating brick panels from plaster: the manufacture of piece slats and applying plaster directly on the wall with subsequent markup.

In the first case, a wooden form is assembled into which the gypsum mixture is poured. Pre-wall shapes are necessarily lubricated with vaseline to facilitate the process of seizure of a dried "brick".

In the second case, the gypsum is gradually distributed on the wall-processed wall. While the gypsum is wet with a spatula or wide knife creates bricks. To give the canvas of greater texture for the dried "masonry", you can walk with a dry rigid brush, and for smoothing - a soft and moistened with a tassel. Upon completion of the main works, plaster panels are covered with elastomeric paint, which fills existing pores and cracks, which provides wall protection against dirt.

The advantages of plaster:

• cheapness,
• the ability to show creativity
• easily digested to staining,
• suitable for finishing the walls of the wrong shape,
• fire resistant
• perfectly keeps warm
• environmental.

Lack: attracts dust.

Decorative plaster

Stucco is an affordable tool for interior wall decoration. The wealth of textures of this material allows you to get a variety of art objects, including stylized brickwork. Plastering is ideal for decorating curvilinear walls, to which it is impossible to lay a tile.

Benefits of plaster:

• durability,
• excellent thermal insulation characteristics,
• simplicity of application
• practicality,
• wide color palette.

Disadvantage: Dust accumulates in the slots of plastered surfaces.

Clinker tile

Clinker tile is an excellent alternative to real brickwork. Clinkers, like most bricks, are made of clay, but such briquettes are much thinner and easier than standard bricks. Due to a minor weight, clinker tiles can be used for the inner cladding of several walls of the room without the risk of creating unwanted load on the foundation.

The clinker tile is unlawed and glazed. The unglazed tile more than other clinkers is similar to the brick, but not suitable for decorating surfaces subject to regular contamination. The glazed tile is more practical, so it is an ideal option for facing the bathroom or creating a kitchen apron.

Installation of clinkers is made by the same technology as the attachment of ordinary tiles. To give the finished panel of additional similarities with brick masonry, the seams between clinkers are wiping with a solution of cement mixture and large-phrase sand.

Advantages of clinker tiles:

• maximum similarity with bricks,
• not susceptible to fading
• non-toxic
• provides an extra heat and sound insulation,
• resistant to mechanical exposure.

Lack: Some types of clinkers absorb and hold moisture, creating conditions for the reproduction of pathogens of microorganisms, so you need to choose a tile, taking into account the characteristics of the room for which it is intended.

Wallpaper under brick

Wallpapers under the brick are the usual wallpapers for interior decoration of the walls. Unlike other decorative materials under the brick, the wallpaper provides air circulation, which allows you to maintain a microclimate indoor. In addition, after sticking wallpaper, there is practically no construction garbage, which is formed in large quantities when finishing the walls with tiles or.

Most wallpapers under the brick have a smooth surface, but there are also texture canvases, decorated with crumbs or textured folds. You can distinguish such wallpapers from real brickwork with close review.

The advantages of wallpaper:

• allow the wall to "breathe",
• do not reduce the useful space room,
• low cost.

Disadvantages of wallpaper:

• accumulate dust
• prone deformation under the influence of water, so they are not suitable for decoration of bathrooms or kitchen workers,
• it is difficult to clean from fat spots.

Construction panels for brick

The construction panels under the brick are made of plastic, so they are distinguished by increased wear resistance. Such panels are easily laundered from dust, rust and fat drops, so they are often used when decorating the kitchen.

Imitation panels can be mounted horizontally or vertically, varying the image direction. This decor on nails, self-tapping screws or screws is mounted. For high-quality consolidation of some building panels, it will take a doom.

The advantages of the panels under the brick:

• cheapness,
• durability,
• natural appearance,
• ease of installation,
• low weight
• easy to replace the damaged element,
• improve the thermal insulation of the wall.

Disadvantages:

• low-quality finishing panels can highlight toxins,
• when installing panels on the crate decreases the useful space of the room.

Important moments

Decorative wall decoration with imitation of brickwork is a relatively new trend in the decoration of the inner surfaces of the walls. Such a design has not yet had time to hate, so it looks very fresh and original.

Among the entire variety of finishes, you can find materials that will allow to implement almost any designer idea, taking into account the financed finances. However, when repairing repair, it is important not to overdo it with the decor under the brick, since the abundance of such elements can turn the living room into the basement.

Finish inland walls Brick is widely popular and used in various interior styles - Country, Loft, Gothic, English style. Laying of natural brick requires professional skills, perform decorative walls of walls indoors own forces You can use plastic panels for brick walls for interior decoration.

The use of panels imitating brickwork allows you to implement unique design ideas, the material is perfectly combined with other types of finishes, effectively hides the irregularities of the working surface.
These properties include the advantages of wall panels. decorative material, as:

• simplicity of installation work;
• environmental and fire safety;
• moisture resistance;
• soundproof properties;
• resistance to temperature differences, corrosion and ultraviolet;
• ease of care;
• durability;
• affordable price.

In contrast to the natural brick panel for interior decorations, the space does not reduce the bearing structures.

Another plus of construction decorative material is maintainability, if necessary, the replacement of one of the elements will not need to dismantle all the skin, it suffices to replace a separate area.

Types of brick panels for interior decoration

Today, the building materials market presents several types of materials for the interior decoration under the brick:

• pVC panels;
• mDF panels.

PVC panels

PVC panels are made from polyvinyl chloride with adding softening components. Wall panels Under the brick is manufactured using special molds, production technology allows you to finishing the material required. The finished decorative elements are painted with resistant paints or they are covered with a film that imitating the brick or natural stone.

Brick wall PVC panels are produced in several formats - in the form of rails, plates or sheets. Standard dimensions sheet panelimitating brickwork:

length - 2.5-3 meters;

width - from 1 to one and a half meters;

thickness - from 0.8 to 1 meter.

Plastic panels in the form of rivers are a hollow inside the design, enhanced with the help of rigid ribs. In the construction market there are several options for the sizes of PVC panels. The length of the decorative rail can be 3000, 4500 or 6000 millimeters, the width varies in the range of 100, 200 or 300 millimeters, the rack thickness can reach 50, 60, 80, 100 millimeters.

Application area:

• facing walls of residential and public buildings;
• decorative finishing of utility rooms;
• decoration of balconies, loggias, terraces;
• front work.

PVC panels under brick on the balcony

The main advantages of wall PVC panels:

• realistic appearance;
• a wide variety of forms and color solutions;
• low weight;
• flexibility;
• low cost.

MDF panels

Wood-chip panels are widely used for outdoor and inner wall cladding.

The MDF panel is based on a pressed wood chips, modified resins with a minimum amount of formaldehyde are used as a binder component. The production technology lies in the dry pressing of wood raw materials under high pressure.

MDF (Fiberboard) panels under the brick

The MDF panels are characterized by higher quality and strength in comparison with polyvinyl chloride products, however, the value of the material is respectively higher.

Advantages of MDF panels:

• hygienicity;
• environmental Safety;
• the ability to withstand additional loads (on the wall lined with MDF plate, permissible to hang lockers and shelves);
• acceptable price.

Methods of installation

Panels for walls under brick for interior decorations can be mounted in two ways:

• on glue;
• on the crate.

Installation of panels for glue on own forces

This method is most often used for the decorative finishing of the PVC panels walls. Installation of facing material is produced in several stages.

The first stage is to prepare the working surface. From the walls remove the elements of the past decoration, dust and pollution.

If necessary, the walls to be finished are aligned with a plaster-spacing solution. After drying the plaster layer, the surface is ground and dried.

The second stage is the installation of PVC plates. The following tools and materials will be needed to perform installation work:

• lobzik;
• building level;
• construction adhesive mixes either liquid nails;
• solutions for finishing seams.

Installation of the finishing material is performed in the direction from the corner to the center. The fitting of the finishing panels under the required size is performed using the jigsaw.

Using construction mix The solution is applied to the wall, and not on finishing material. Decorative panels "Sitting" per solution. The correctness of the attachment relative to the horizontal and verticals is verified using a construction level.

When using "liquid nails", the locking material is applied to the wrong side of the panel point or zigzag line. Next, the panel is pressed against the surface, it takes off and re-pressed for a few seconds, smoothed in the direction from the center to the edges. After the fragment grabbed the wall, proceed to the installation of the next item. After complete drying, the seams between the individual elements are watched by a solution.

Installation of "brick" panels for the crate

The method of mounting the decorative panels to the crate will allow to hide engineering communications, this method is often used along with heat and soundproofing activities.

The technology of facing internal walls using the crate consists of two main steps:

• creating a frame;
• installation of decorative panels on the crate.

Creating a carcass

Benefits of a framework fashion

The method of fastening panels on the crate has a number of advantages:

• the processed surface does not require special training;
• correctly mounted frame will ensure the solidity of the walls;
• easy dismantling decorative panels.

The disadvantages of the specified method include:

• temporary and financial costs;
• reducing the area of \u200b\u200bthe room.

Procedure for work

Interior decoration walls with decorative panels under the brick is performed using tools such as:

• roulette;
• building level;
• screwdriver;
• electrolzik or hand saw;
• building stapler.

In addition to panels that imitate brickwork, you will need:

• self-tapping screws and dowel nails;
• wooden or metal rails;
• fasteners;
• starting profile;
• finish profile;
• staples.

To create a base for decorative cladding, wooden strips with a cross section of at least 20x20 mm are used. The process of installing a wooden crate is simpler compared to a metal analogue, however, a frame of wooden planks has its own characteristics:

• wooden frame is not advisable to use indoors with high humidity;
• wooden elements of the crates must be necessarily processed by special antifungal compositions.

Installation of a wooden frame is performed as follows:

wooden rails to the floor and ceiling are fixed, after that, it is embarked on the installation of longitudinal racks with a step that does not exceed 50 cm. On the length of the wooden slats, the holes for fasteners are drilled in a step of 50-70 cm. The planks are applied to the surfaced surface, and through the processed Holes carry out the wall markup. Next, the walls are drilled in the wall and place the "sockets" for fastening elements, the vertical frame racks are mounted. At all stages of installation work, the quality of the installation is monitored using a construction level. To improve sound and thermal insulation, the space between the frames of the frame can be filled with insulation.

The process of creating a metal frame is close to the technology of the construction of a wooden structure, the main difference is to use a large number of hardware. The crate is based on metallic UD (narrow rails) and CD (wide) profiles. Initially, the guide racks to the floor and the ceiling are attached, the rails are mounted in parallel to each other. The intermediate rails are then installed in the following order: there are marking of parallel lines, providing for a step between vertical metal profiles in the range of 50-70 cm. According to the markup line, P-shaped mounts are installed, the number of fasteners is at least five pieces per vertical rack. A wall profile is introduced into the guide racks and is hardly fixed by P-samples.

Metal obsechtka

Savage framework panels

After the skeleton design is made, you can proceed to the direct cladding of the crate decorative elements. The first thing to the rakes of the frame structure with the help of a construction stapler and metal brackets are fixed by the starting profile. Next, one by one mounted wall panels, the elements are fixed, too, through a stapler and brackets. After installing the penalté decorative panel Install the finishing profile, the last plate is cut to the desired size and is entered into the finishing profile. The process of facing the inner walls is over!
In conclusion, we suggest to see a small video on the installation of plastic panels for walls under the brick:

Recently, people strive to bring more diverse and bright life colors in their lives, it is observed in many decisions: in clothes, in the choice of flowers of cars and even in the design of the interior of their own apartment. Bold experiments occur in all rooms and accommodations of housing: with color solutions, with a combination of materials and mixing styles.

Live interest is presence in the interior of various elements of brickwork, and sometimes whole walls of bricks. About how it is better to do and what kind of help is our instruction.

Comparison of opportunities and needs

Well, when you live in a brick house. What could be easier, allocated a sector of the walls, dismissed the layer of plaster, read the wall, made the extender exactly and neatly, opened the wall with varnish, and before this primer deep penetration For better perception of the wall of the lacquer and all. Success will be achieved quickly and with minimal costs.

But not everyone was so lucky this time, and even repenting the plaster is not a fact that you will come across a flat wall and perfect brickwork. Therefore, there are several options for giving the wall or its part of the type of brick wall.

Namely:

• The panel under the brick for interior decoration is the product is capable of literally the word "dress" the wall is very fast;
• Decorative tile, which is actually. Stacked as a tile, and due to the embossed decorative layer completely from facing bricks;
• . This option is mentioned more for familiarization. Often, wallpapers cannot completely recreate the appearance of the brick wall. Although recently, and we must pay tribute to manufacturers, the wallpaper has acquired the necessary texture. And the possibility of staining, open and in front of this coating, great perspectives. After all, in fact, you can recreate on our walls and construction brick, and double silicate brick M 150.

Closer to panels

Wall plastic panels, this is exactly the material that perfectly cope with the task.

Like any plastic products, panel data have a widest color palette, undemanding in care, but if necessary, it is easy to clean with conventional detergents, which are able to reproduce not only the various colors of the brick, but also a variety of masonry, do not require additional coating or protection, and also calmly Put ultraviolet.

There are two ways to fix these panels to the wall:

1. The first is gluing. At the site of acquiring wall panels, you will always find and glue, which is able to glue these products.

Note! The panels are produced different thickness. Most often from 3 to 6 mm, when choosing glue carefully read what kind of products it is designed, and with what expense is declared. Do not attempt to save on a decrease in quantity, or on other changes in the technological process.

But there is another moment, without which the stagnation will be only a waste of resources, these are flat walls. The gluing assumes smooth walls, or a wall with small defects that are invisible visually.

Before salaling, the upper baguettes and the lower plinth is recommended to remove. Cutting from the angle (the evenness of the location is checked by the level), gradually gaining a wall that you can safely make a very short period of time and also with your own hands.

For your information! Wall panels are easily adjusted for the required saw with small teeth.

1. The second option is to align the walls using the profile crate, and then the mounting of the panels by self-draws. Although this technology has been repeatedly described in many of our materials and the Internet edition, it clearly does not dislike, but the main milestones are still worth reminding.

So:

• The guide profile is attached to the floor, as well as when installing drywall. Then the same action is repeated on the ceiling. Mounts occur in parallel to each other, as close as possible to the wall. On the wall with a certain step, there are parallel vertical lines for which the P-shaped attachments are installed at least 5 pieces per profile. Wall profiles are reached into the guide profiles and are rigidly fixed with pyphums in the design created by profiles.

Tip! The number of profiles you are easy to consider yourself based on what you strengthen light material And there is no need to 40 cm. But one panel should be attached at least on two profiles.

• Next, install the panel, and fix them with self-draws.
• As you can see, the interior and finishing of the house outside the panels under the brick, very much of themselves. In external work, it is possible, and in principle widely used, insulation using both tiled insulation. So and mineral wool.

Brick panels

Brick panels for interior decoration are considered in the same technological aspect as the tile, but do not forget that this material will be even harder than the tile. Therefore, not only uneven walls are not suitable for it, but also lined with plasterboard with a shave step more than 40 cm, also for this material is not acceptable.

When laying on a flat surface with a brick tile, they come in the same way as with the usual, only in this case the adhesive will be easier to apply directly on the wall, and not on the stacking material. The tile is then assigned, aligned and glued and already after the preparedness of the material when it is fastened, the extension occurs.

Finally

For each desire - its price. So the desire to enter a brick wall in the interior has its own cash equivalent. The video in this article prepared another overview of the topic, see.